Text preview for : stk4141v.pdf part of Sanyo stk4141v AF power amplifier (split power supply)



Back to : stk4141v.rar | Home

Ordering number: EN 1649C

Thick Film Hybrid IC

STK4141V AF Power Amplifier (Split Power Supply) (25W + 25W min, THD = 0.08%)

Features
· The STK4102II series (THD=0.4%), STK4201V series (THD=0.08%) and STK4141X series (THD=0.02%) are pin-compatible. Once the PCB pattern is designed, you can easily satisfy the repuirements for new sets simply by changing the IC. · Built-in muting circuit to cut off various kinds of pop noise. · Greatly reduced heat sink due to substrate temperature 125°C guaranteed. · Current mirror circuit application reduces distortion to 0.08%.

Package Dimensions
unit: mm
4040
[STK4141V]

Specifications
Maximum Ratings at Ta = 25°C
Parameter Maximum supply voltage Thermal resistance Junction temperature Operating substrate temperature Storage temperature Available time for load short-circuit Symbol VCC max j-c Tj Tc Tstg ts VCC = ±27V, RL = 8, f = 50Hz, PO = 25W Conditions Ratings ±40.5 2.6 150 125 -30 to +125 2 Unit V °C/W °C °C °C s

Recommended Operating Conditions at Ta = 25°C
Parameter Recommended supply voltage Load resistance Symbol VCC RL Conditions Ratings ±27.0 8 Unit V

SANYO Electric Co., Ltd. Semiconductor Business Headquarters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110 JAPAN
61197HA (ID) / D2793HO (KOTO) / 8298MO / N224MY, TS 5-1990 No. 1649--1/5

STK4141V

Operating Characteristics at Ta = 25°C, VCC = ±27.0, RL = 8(non-inductive), Rg = 600, VG = 40dB
Parameter Quiescent current Symbol ICCO PO1 Output power PO2 Total harmonic distortion Frequency response Input impedance Output noise voltage Neutral voltage Muting voltage THD fL, fH ri VNO VN VM Conditions VCC = ±32.5V f = 20Hz to 20kHz, THD = 0.08% VCC = ±24V, f = 1kHz, THD = 0.2%, RL = 4 f = 1kHz, PO = 1W PO = 1W, +0 dB -3 20 to 50k 55 1.2 -70 -2 0 -5 +70 -10 min 20 25 25 0.08 typ 40 max 100 Unit mA W W % Hz k mVrms mV V

f = 1kHz, PO = 1W VCC = ±32.5V, Rg = 10k VCC = ±32.5V

Notes.

For power supply at the time of test, use a constant-voltage power supply unless otherwise specified. For measurement of the available time for load short-circuit and output noise voltage, use the specified transformer power supply shown below. The output noise voltage is represented by the peak value on rms scale (VTVM) of average value indicating type. For AC power supply, use an AC stabilized power supply (50Hz) to eliminate the effect of flicker noise in AC primary line.

Specified Transformer Power Supply (Equivalent to RP-25)

Equivalent Circuit

No. 1649--2/5

STK4141V

Sample Application Circuit: 25W min AF Power Amplifier (2channels)

Voltage gain, VG - dB

Frequency, f - Hz

Voltage gain, VG - dB

Frequency, f - Hz

Input voltage, Vi - mV

IC Power dissipation, Pd - W

Output power, PO - W

Output power, PO - W

No. 1649--3/5

Quiescent current, ICCO - mA

Total harmonic distortion, THD - %

IC Power dissipation, Pd - W

Output power, PO - W

Output power, PO - W

IC substrate temperature, Tc - °C Quiescent current, ICCO - mA Total harmonic distortion, THD - Hz Supply voltage, VCC - V Output power, PO - W Quiescentvoltage, VN - mV Neutral current, Icco - mA

Quiescentvoltage, VN - mV Neutral current, Icco - mA

STK4141V

Output power, PO - W

Supply voltage, VCC - V

No. 1649--4/5

STK4141V

Output power, PO - W

Frequency, f - Hz

s

No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of which may directly or indirectly cause injury, death or property loss.


s

Anyone purchasing any products described or contained herein for an above-mentioned use shall: Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors and all their officers and employees, jointly and severally, against any and all claims and litigation and all damages, cost and expenses associated with such use: Not impose any responsibility for any fault or negligence which may be cited in any such claim or litigation on SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of their officers and employees, jointly or severally. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties.

s

This catalog provides information as of June, 1997. Specifications and information herein are subject to change without notice.
No. 1649--5/5