Text preview for : G544-2038-0_Displaywriter_Host_Attach_Programming_Guide_Async_Comm_Sep81.pdf part of
| Home
...---- -
- - ---
-~- -
--
- - - ----
- ---
--.-..
-----
-.
----- . - IBM Displaywriter System
Host Attach Programming Guide
Asynchronous Communication
G544-2038-0
IBM Displaywriter System
Host Attach
Programming Guide
Asynchronous Communication
- -- --
--
--
-- . . - -
--
-
----
- - . ---
- ---
---~-
-~-,-
Check the FCC label on the back of the Electronics Module to determine which
of the following warning statements applies to your IBM Displaywriter System.
Warning: This equipment generates, uses, and can radiate Warning: This equipment generates, uses, and can radiah~
radio frequency energy and if not installed and used in radio frequency energy and if not installed and used in
accord~nce with the instructions manual, may cause inter- accordance with the instructions manual, may cause inter-
ference to radio communications. As temporarily permitted ference to radio communications. It has been tested and
by regulation, it has not been tested for compliance with found to comply with the limits for Class A computing
the limits for Class A computing devices pursuant to Sub- devices pursuant to Subpart J of Part 15 of FCC Rules,
part J of Part 15 of FCC Rules, which are designed to which are designed to provide reasonable protection against
provide reasonable protection against such interference. such interference when operated in a commercial environ-
Operation of this equipment in a residential area is likely to ment. Operation of this equipment in a residential area is
cause interference in which case the user at his own expense likely to cause interference in which case the user at his
will be required to take whatever measures may be required own expense will be required to take whatever measures
to correct the interference. may be required to correct the interference.
First Edition, september 1981
This edition applies to the IBM Displaywriter System Asynchronous
Communications Program 5608-SR1, an IBM Licensed Program. The
licensed Program described in this manual, and all licensed
material available for it, are provided by IBM under the terms of
the Agreement for IBM Licensed Programs. Your branch office can
advise you on ordering procedures.
Information in this manual is subject to change. Subsequent
revisions or technical newsletters will include such changes.
All information should be used for planning purposes only until
availability of the related product support. Before using this
publication in connection with the operation of IBM systems,
consult your IBM representative to find out which editions are
applicable and current.
It is possible that this material may contain reference to, or
information about, IBM products (machines and programs),
programming, or services that are not announced in your country.
Such references or information must not be construed to mean that
IBM intends to announce such IBM products, programming, or
services in your country.
Requests for copi es of thi s and IBM publ i cat ions should be made to
your IBM representative or to the IBM branch office serving your
locality.
A form for reader's cnmments is at the back of this publication.
If the form has been removed, address your comments to IBM
Corporation, Information Development, Department 507, Building
997, 11400 Burnet Road, Austin, Texas 78758. IBM may use and
distribute any information you supply in any way it believes
appropriate without incurring any obligation whatever. You may,
of course, continue to use the information you supply.