Text preview for : LG_LCD_DCR_Memory_Card_Software_Download_[SM].pdf part of LG LG LCD DCR Memory Card Software Download [SM] LG Monitor LG_LCD_DCR_Memory_Card_Software_Download_[SM].pdf
Back to : LG_LCD_DCR_Memory_Card_So | Home
Great Company Great People
US LCD DCR
Memory Card Software Download
Step 0. Environment for download
USB
Memory card
External card reader
1) Insert a memory card into a card reader attached to your PC.
Refer to user manual for the TV for a list of supported memory cards, but most types
are accepted.
Step 1. Copy the download file to the memory card.
Download file( *.epk)
Destination drive (memory card)
Step 2. Insert the memory card to the slot of the set.
SD Card
Memory Card Slot
TV Set will display messages as below :
Current CPU code version of TV set
Download file name in memory card
& CPU code version
These messages are displayed automatically for the following case :
- The current version of the CPU code is lower than that of memory card.
Step 3. Press the ENTER key in remote controller
Enter key
If you press the Enter key, the screen is blank status for a few
seconds.
TV Set will display messages as below :
Finished
Upgrade rate
- We recommend that memory card should not be ejected during software upgrade operation.
-If you want to upgrade several TV sets with one memory card, you can eject memory card form Memory Card Slot
when displays upgrade rate such as "Upgrading...2 percent".
Upgrade complete
Upgrade Done
Restart after 14 seconds
TV display will show , message when upgrade complete.
TV system will restart when press enter key on the remote controller
If you doesn't press enter key, the system will restart after 14 second.
Thus whole software upgrade process will finish.