manuale_platinum_eng[1].pdf part of GAGGIA manuale platinum eng[1] manuale_platinum_eng[1].pdf, GAGGIA Platinum manuale_platinum

Text preview for : manuale_platinum_eng[1].pdf part of GAGGIA manuale platinum eng[1] GAGGIA Platinum manuale_platinum_eng[1].pdf

Back to : manuale_platinum_eng[1].p | Home

TECHNICAL SERVICE
MANUAL

Emissione Luglio 2007
REV.00
Ideas with Passion

PLATINUM TECHNICAL SERVICE MANUAL (Rev 00 Aug.06): CONTENTS

1. Introduction (rev.00)
1.1 Documentation required
1.2 Tools and equipment required
1.3 Safety warnings
1.4 Platinum range
2. Technical data (rev.00)
2.1 Product technical data
2.2 Internal / external machine components
3. Summarised instructions (rev.00)
3.1 Client and programming menu (rev.00)
3.2 Maintenance and cleaning (rev.00)
4. Diagrams (rev.00)
4.1 Wiring diagram (rev.00)
4.2 Water circuit diagram (rev.00)
5. Troubleshooting (rev.00)
5.1 Test functions (rev.00)
5.2 Diagnostics function (rev.00)
5.3 Error messages for Service personnel (rev.00)
5.4 Problems, Causes, Remedies (rev.00)
6. Operating logic (rev.00)
6.1 Resetting coffee grounds drawer (rev.00)
6.2 Water reserve (rev.00)
6.3 Motorized tank (rev.00)
6.4 Prima water (rev.00)
6.5 SBS valve (rev.00)
6.6 Solenoid pilot (rev.00)

7. Component assembly / disassembly (rev.00)
7.1 Top cover (rev.00)
7.2 Right and left-side cover (rev.00)
7.3 Electronics (rev.00)
7.4 Gearmotor (rev.00)
7.5 Pump (rev.00)
7.6 Heater and solenoid pilot unit (rev.00)
7.7 Oetiker clamp assembly and disassembly (rev.00)
7.8 Coffee grinder (rev.00)
7.9 Grinder adjustment/assembly and disassembly (rev.00)
7.10 Grinder adjustment during servicing (rev.00)
7.11 Motorized drip tray (rev.00)
8. Service schedule (rev.00)
8.1 Routine maintenance Check list (rev.00)
9. Exploded drawing (rev.00)

TALEA Contents
1/1
REV00 - August 06
SECTION 1
INTRODUCTION

REV.00
TALEA Section 01

REV00 - August 06
1.1 Documentation required

The following technical documentation is required for repairs:

Instruction booklet for specific model.
Technical documentation for specific model (diagrams, exploded drawings).

1.2 Tools and equipment required

As well as the standard equipment, the tools listed below are required.

1 special screwdriver with Torx T10 tip.

1 digital thermometer with full 200