N5245-90016 Technical specifications Data Sheet for 2-Port & 4-Port PNA-X Network Analyzer with opti part of , text manual preview

Text preview for : N5245-90016 Technical specifications Data Sheet for 2-Port & 4-Port PNA-X Network Analyzer with opti part of

| Home

Keysight 2-Port and 4-Port
PNA-X Network Analyzer
N5244A - 10 MHz to 43.5 GHz
N5245A - 10 MHz to 50.0 GHz
with Option H29

Data Sheet and
Technical
Specifications
Documentation Warranty
THE MATERIAL CONTAINED IN THIS DOCUMENT IS PROVIDED "AS IS," AND IS SUBJECT TO
BEING CHANGED, WITHOUT NOTICE, IN FUTURE EDITIONS. FURTHER, TO THE MAXIMUM
EXTENT PERMITTED BY APPLICABLE LAW, KEYSIGHT DISCLAIMS ALL WARRANTIES, EITHER
EXPRESS OR IMPLIED WITH REGARD TO THIS MANUAL AND ANY INFORMATION CONTAINED
HEREIN, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE. KEYSIGHT SHALL NOT BE LIABLE FOR ERRORS OR
FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH THE FURNISHING, USE,
OR PERFORMANCE OF THIS DOCUMENT OR ANY INFORMATION CONTAINED HEREIN. SHOULD
KEYSIGHT AND THE USER HAVE A SEPARATE WRITTEN AGREEMENT WITH WARRANTY TERMS
COVERING THE MATERIAL IN THIS DOCUMENT THAT CONFLICT WITH THESE TERMS, THE
WARRANTY TERMS IN THE SEPARATE AGREEMENT WILL CONTROL.

DFARS/Restricted Rights Notice
If software is for use in the performance of a U.S. Government prime contract or subcontract,
Software is delivered and licensed as "Commercial computer software" as defined in DFAR 252.227-
7014 (June 1995), or as a "commercial item" as defined in FAR 2.101(a) or as "Restricted computer
software" as defined in FAR 52.227-19 (June 1987) or any equivalent agency regulation or contract
clause. Use, duplication or disclosure of Software is subject to Keysight Technologies' standard
commercial license terms, and non-DOD Departments and Agencies of the U.S. Government will
receive no greater than Restricted Rights as defined in FAR 52.227-19(c)(1-2) (June 1987). U.S.
Government users will receive no greater than Limited Rights as defined in FAR 52.227-14 (June
1987) or DFAR 252.227-7015 (b)(2) (November 1995), as applicable in any technical data.
Definitions .......................................................................................................... 5

Specifications: N5244A and N5245A Option H29 .......................................... 6
Corrected System Performance with 3.5mm Connectors ............................ 6
Table 1. 85056A Calibration Kit ..................................................................... 6
Specifications: N5244A and N5245A Option H29 (continued) .................... 7
Specifications: N5244A and N5245A Option H29 (continued) .................... 8
Specifications: N5244A and N5245A Option H29 (continued) .................... 9
Table 2. N4693A 2-Port Electronic Calibration Module ............................10
Specifications: N5244A and N5245A Option H29 (continued) ..................11
Specifications: N5244A and N5245A Option H29 (continued) ..................13

Uncorrected System Performance, N5244A and N5245A Option H29 ......14
Noise Error Terms: N5244A and N5245A Option H29 ...............................14
Table 3. Noise State Directivity, Port 1 and Port 21 (dB) ............................14
Table 4. Noise State Load Match, Port 11 (dB) ...........................................15
Table 5. Noise State Load Match, Port 21 (dB) ............................................16
Table 6. Noise State Reflection Tracking (S11 and S22), Min/Max (dB) ......17
Table 7. Noise State Transmission Tracking, Min/Max (dB) ......................17
Table 8. Noise State Source Match, Port 11 (dB) ........................................18
Table 9. Noise State Source Match, Port 21 (dB) ........................................18

Test Port Input: Option H29 ............................................................................19
Table 10. Receiver Noise Figure, Port 2 (dB) ..............................................19
Table 11. Noise Jitter1,2 (dB) .........................................................................20
Table 12. Noise Receiver Linearity (dB) ......................................................21
Table 13. Noise Receiver Input Range ........................................................22

Test Port Output: Option H29 .........................................................................23
Table 14. Max Leveled Power, Port 1 Filtered Mode (dBm) ......................23
Table 15. Max Leveled Power, Port 1 High Power Mode (dBm) ...............24
Table 16. Max Leveled Power, Port 1 Source 1
Combine Mode, Filtered Mode (dBm) ..........................................................25
Table 17. Max Leveled Power, Port 1 Source 1
Combine Mode, High Power Mode (dBm) ...................................................25
Table 18. Max Leveled Power, Port 1 Source 2
Combine Mode, Filtered Mode (dBm) ..........................................................26
Table 19. Max Leveled Power, Port 1 Source 2, Combine Mode
High Power Mode (dBm) ...............................................................................26
3
Table 20. Max Leveled Power, Port 2 (dBm) ...............................................27

Test Set Block Diagrams .................................................................................28
Figure 1. 4-Port N5244A and N5245A Option 423/H29 ...........................28
Receiver Block Diagram ................................................................................28

4
This is the technical specifications for the N5244A and N5245A PNA-X network analyzer with option H29.
Option H29, adds 26.5 GHz low-noise receivers to N5244A/45A for fully-corrected noise figure
measurements of amplifiers, frequency converters, and mixers, utilizing source-correction technique
(requires option 400, 419 and 423). See the block diagram.
Option 400, 4-port standard test set (includes twelve front-panel access loops), power range, and an
internal second source (Option 080 recommended).
Option 419, adds 4-port extended power range, source and receiver attenuators, and bias-tees (requires
Option 400).
Option 423, adds an internal combiner, and mechanical switches to the 4-port analyzer (requires Option
400, 419, and 080).

Notes
In noise mode, the S-parameter measurement performance above 26.5 GHz is degraded due to the
26.5 GHz noise coupler in the port 2 source path (shown in green on the block diagram on page
30). Noise measurements are not specified above 26.5GHz.
This document provides technical specifications for the 85056A calibration kit, and the N4693A 2-
Port ECal module. Please download our free Uncertainty Calculator from
http://www.keysight.com/find/na_calculator to generate the curves for your calibration kit and PNA
setup.

Definitions
All specifications and characteristics apply over a 25