Text preview for : 2001SCAN_RevB_DocSpec.pdf part of Keithley 2001SCAN RevB DocSpec Keithley 2001 2001SCAN_RevB_DocSpec.pdf
Back to : 2001SCAN_RevB_DocSpec.pdf | Home
Scanner Option 2001-SCAN Specifications
GENERAL ENVIRONMENTAL: Meets all Model 2001 environmental
10 CHANNELS: 8 channels of 2-pole relay input. specifications.
2 channels of 2-pole solid state input.
All channels configurable to 4-pole. DIMENSIONS, WEIGHT: 21mm high x 72mm wide x 221mm deep
(0.88 in. x 2.88 in. x 8.7 in.). Adds 0.4kg (10oz.).
CAPABILITIES
a. Multiplex one of ten 2-pole or one of five 4-pole signals into DMM and/or any SCANNER CONFIGURATION:
combination of 2 or 4-pole signals, or HI
b. Two channel, high speed multiplexing into the DMM, or Channel 1
LO
c. High speed ratio or delta measurements.
Channels 2-4 Same as Ch 1
FUNCTIONS
(can be mixed from channel to channel)
HI HI
DCV, ACV, 4-Wire , 2-Wire Channel 5 OUT A
4-Wire RTD, Frequency DCI, ACI 2-Wire RTD LO LO
Relay Channels: Yes Yes* Yes
Solid State Channels: Yes - - HI
* On 2 channels, using user-supplied 1/4W shunt resistor. OUT B
LO
RELAY INPUTS
4-POLE 2-POLE
MAXIMUM SIGNAL LEVEL:
DC SIGNALS: 110V DC, 1A switched, 30VA maximum (resistive load).
HI
AC SIGNALS: 125V AC rms or 175V AC peak, 100kHz maximum, 1A switched, Channel 6
62.5VA maximum (resistive load). LO
CONTACT LIFE: >105 operations at maximum signal level; >108 operations cold
switching. Channels 7-9 Same as Ch 6
CONTACT RESISTANCE: <1 at end of contact life.
ACTUATION TIME: 2.5ms maximum on/off. HI
Channel 10
SOLID STATE INPUTS LO
RESISTANCE: <275 (including 200 series resistor).
MAXIMUM SIGNAL LEVEL: 110V DC, 175V peak AC, 50mA, 100kHz
maximum.
ACTUATION TIME: 150