Text preview for : pck6115r.pdf part of Samsung pck6115r Samsung Proj TV PCJ534RF pck6115r.pdf
Back to : pck6115r.pdf | Home
SAMSUNG PROJECTION TV SERVICE GUIDE
*Supercedes and appends service manual data*
Covers Models: (P51 Chassis)
PCJ612R/PCJ 522R (covers PCK520)
PCJ533R
PCJ533RF
PCJ534RF (covers PCJ532RF, PCK5315R)
PCJ614RF (covers PCJ611RF, PCK6115R)
HCJ552W/HCJ652W
Last update: 3/14/01
Downloaded from www.Manualslib.com manuals search engine
SAMSUNG PROJECTION TV SERVICE GUIDE
Table of Contents
Sections
1. How to Use This Guide
2. Service Bulletins
3. Flow Charts/Micro Kits
4. Macro Kit Instructions
5. Parts Data
6. Assembly/Disassembly
7. Escalation/Who to Call
Last update: 3/14/01
Downloaded from www.Manualslib.com manuals search engine
SAMSUNG PROJECTION TV SERVICE GUIDE
Section 1 - How to Use This Guide
How to use this Guide
This guide is divided into seven sections. Start with the section marked
"Instructions".
The models covered in this document are derived from the P51A chassis. However; this
chassis has several different versions that are NOT covered in the service manuals.
Instructions to Start Service:
1. Obtain model, serial and symptom.
2. Review service bulletins (section 2), for common fixes. If Service Bulletin states that
repair is common, complete repair as indicated. Otherwise, proceed to section 3.
3. Review symptom/repair list as per the micro kit section (3). Order part number for
"kit" or individual parts.
Important Note: Order MACRO Kit only when technically required or the individual boards are
not available as an additional 45 minutes to 1 hour is needed for convergence, alignments and
other configuration setup.
4. If the previous steps do lead to a clear diagnosis, then proceed to the flow chart in
section 3 to help assist you in determining the correct PCB's to order.
5. Place order through Samsung Parts Department.
Note: Distributors DO NOT carry PCB's or macro kits, so backorder with
no eta will result. Parts Department will not accept an order for PTV parts without a
serial number because correct ID cannot be assured.
6. Parts will automatically ship 2nd day or faster. It is essential that the macro kit be
returned A.S.A.P. Your account will be charged, depending on the kit, up to
$1500.00 if the kit is not returned within 30 days.
7. When installing parts (refer to section 6 - Assembly/Disassembly), repair alignment
or adjustment will be necessary. There are three adjustment modes:
Convergence