Text preview for : ANRITSU MS462xx Maintenance.pdf part of Anritsu ANRITSU MS462xx Maintenance Anritsu ANRITSU MS462xx Maintenance.pdf
Back to : ANRITSU MS462xx Maintenan | Home
Caution
Do not exceed the operating input power level, voltage
level, current level, and signal type that is appropriate for
the instrument being used. Refer to your instrument's op-
eration manual for safe operating practices and device
limitations.
Electrostatic Discharge (ESD) can damage the highly
sensitive circuits in the instrument. ESD is most likely to
occur as test devices are being connected to, or discon-
nected from, the instrument's front and rear panel ports
and connectors. You can protect the instrument and test
devices by wearing a static-discharge wristband. Alterna-
tively, you can ground yourself to discharge any static
charge by touching the outer chassis of the grounded in-
strument before touching the instrument's front and rear
panel ports and connectors. Avoid touching the test port
center conductors unless you are properly grounded and
have eliminated the possibility of static discharge.
Repair of damage that is found to be caused by electro-
static discharge is not covered under warranty.
MS462XX
VECTOR NETWORK MEASUREMENT SYSTEM
MAINTENANCE MANUAL
490 JARVIS DRIVE