Text preview for : N5242-90003 Installation Note_252C 2nd Source_252C Combiner_252C & Mech Switches Upgr Kit To Upgr N5 part of
| Home
Keysight Second Source,
Combiner, and Mechanical
Switches Upgrade Kit
To Upgrade PNA-X N5241A, N5242A or N5249A Option 219 to Option
224
For Analyzers with Serial Numbers Prefixed MY/SG/US5150 and Below
Upgrade Kit Order Numbers: N5241AU-922, N5242AU- 922 and
N5249AU- 922
Keysight Kit Number: N5242-60102
Installation Note
Installation Note N5242-90003 1
WARRANTY STATEMENT
THE MATERIAL CONTAINED IN THIS DOCUMENT IS PROVIDED "AS IS," AND IS SUBJECT TO BEING
CHANGED, WITHOUT NOTICE, IN FUTURE EDITIONS. FURTHER, TO THE MAXIMUM EXTENT PERMITTED BY
APPLICABLE LAW, KEYSIGHT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED WITH REGARD
TO THIS MANUAL AND ANY INFORMATION CONTAINED HEREIN, INCLUDING BUT NOT LIMITED TO THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. KEYSIGHT
SHALL NOT BE LIABLE FOR ERRORS OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION
WITH THE FURNISHING, USE, OR PERFORMANCE OF THIS DOCUMENT OR ANY INFORMATION CONTAINED
HEREIN. SHOULD KEYSIGHT AND THE USER HAVE A SEPARATE WRITTEN AGREEMENT WITH WARRANTY
TERMS COVERING THE MATERIAL IN THIS DOCUMENT THAT CONFLICT WITH THESE TERMS, THE
WARRANTY TERMS IN THE SEPARATE AGREEMENT WILL CONTROL.
DFARS/Restricted Rights Notice
If software is for use in the performance of a U.S. Government prime contract or subcontract, Software is
delivered and licensed as "Commercial computer software" as defined in DFAR 252.227-7014 (June 1995), or as
a "commercial item" as defined in FAR 2.101(a) or as "Restricted computer software" as defined in FAR 52.227-
19 (June 1987) or any equivalent agency regulation or contract clause. Use, duplication or disclosure of
Software is subject to Keysight Technologies' standard commercial license terms, and non-DOD Departments
and Agencies of the U.S. Government will receive no greater than Restricted Rights as defined in FAR 52.227-
19(c)(1-2) (June 1987). U.S. Government users will receive no greater than Limited Rights as defined in FAR
52.227-14 (June 1987) or DFAR 252.227-7015 (b)(2) (November 1995), as applicable in any technical data.
Safety Notes
The following safety notes are used throughout this document. Familiarize yourself with each of these notes
and its meaning before performing any of the procedures in this document.
WARNING Warning denotes a hazard. It calls attention to a procedure which, if not correctly performed
or adhered to, could result in injury or loss of life. Do not proceed beyond a warning note until
the indicated conditions are fully understood and met.
CAUTION Caution denotes a hazard. It calls attention to a procedure that, if not correctly performed or
adhered to, could result in damage to or destruction of the instrument. Do not proceed beyond a
caution sign until the indicated conditions are fully understood and met.
2 Installation Note N5242-90003
Description of the Upgrade
IMPORTANT This upgrade kit is only for analyzers with serial numbers prefixed MY/SG/US5150 and below. If
the serial number prefix of your analyzer is above this number, do NOT proceed with the
upgrade. Analyzers with serial numbers prefixed MY/SG/US5150 and below were
manufactured prior to February 2012, and have a older chassis style that requires older
synthesizer boards (included in this kit) without screw tabs. For more information on part
numbers, refer to Chapter 6 in the Service Guide. See "Downloading the Online PNA Service
Guide" on page 5.
This upgrade converts your Option 219 2-port analyzer (with configurable test set, extended power range, and
bias tees) to an Option 224 analyzer by adding: