Text preview for : f45.pdf part of Nikon f45 Nikon pdf f4 f45.pdf
Back to : f45.pdf | Home
TOOL INSTRUCTION
SERVICE DEPT
1. Name ------------------------ Viewfinder mounting rail adjustment tool
2. Purpose -------------------" To adjust the space between viewfinder mounting rails of F4.
3. How to adjust ----- Unfasten two screws on the rail of film advance side.
Then insert the tool between the rails as shown below .
(The shorter side of the tool is the standard space between the rails.)
Push firmly the rail of film advance side toward the rewind side, and
secure it with screws .
Insert the tool in this
direction.
0
0
Standard space between rails
TOOL INSTRUCTION
SERVICE DEPT
\
,. J1.52f3' ():"]
1. NAME: Z LENS HOLDER J15280
2. PURPOSE: To adjust "Z" in AP SLR camera
3. HOW TO ASSEMBLE:
P 1) Mounting Standard Lens for Z Adjustment (J18183)
a) Remove the meter coupling shoe attached on the aperture
ring of J18183.
b) Remove adhesive agent from the circumference of the
aperture index ring (silver ring) of J18183.
(Do not remove adhesive from the sides of the ring.)
c) Unfasten three screws on the tube of J15280 with a
hexagonal wrench, so that they do not protrude from the
inner surface of the tube.
d) Set J18183 on J15280 as shown below and fasten screws.
t 1
\J-&
4
0"
\L Set the index
on the lens
here (at 90