Text preview for : L2605.pdf part of SGS-Thomson L2605 Low dropout voltage regulators L2605 L2685-L2610



Back to : L2605.pdf | Home

L2605 L2685-L2610
LOW DROPOUT VOLTAGE REGULATORS
OUTPUT VOLTAGE OF 5, 8.5 AND 10 V OUTPUT CURRENT UP TO 500 mA NO EXTERNAL COMPONENTS LOW DROP OUT VOLTAGE OVERVOLTAGE PROTECTION ( 100V) REVERSE VOLTAGE PROTECTION SHORT CIRCUIT PROTECTION CURRENT LIMITING THERMAL SHUTDOWN
TO-220

SOT-82

DESCRIPTION The L2600 series og three terminal positive regulators is specially designed to stabilize power supplies car instrumentation in vehicles with 12V battery. Available with output voltages equal to 5V, 8.5 V, 10V, they can supply an output current to 500mA. These devices are protected against load dump and field decay transients (100V), reverse battery, short circuit and thermal overload. BLOCK DIAGRAM

Order codes TO-220 L2605V L2685V L2610V SOT-82 L2605X L2685X L2610X

Output Voltage 5V 8.5 V 10 V

March 1993

1/6

L2605-L2685-L2610
PIN CONNECTION (top view)

ABSOLUTE MAXIMUM RATINGS
Symbol Vi Parameter DC Input Voltage DC Input Reverse Voltage Transient Input Overvoltage: Load Dump: 5ms trise 10ms f Fall Time Costant = 100ms, R source 0.5 Field Decay: 5ms tfall 10ms r Rise Time Costant = 33ms, R source 10 Power Dissipation Junction and Storage Temperature Range Value 35 -28 + 100 Unit V V V

- 100

V

PD Tj, Tstg

Internally Limited - 55 to 150 C

THERMAL DATA
Symbol R th-j-case Rth-j-amb Parameter Thermal resistance junction-case Thermal resistance junction-ambient Max Max SOT-82 8 C/W 100 C/W TO-220 4C/W 75 C/W

APPLICATION CIRCUIT

(*) Note : C1 and C 2 are only needed if the load capacitance exceeds 1000 pF, Recommended values are C1 = 0.1 F and C2 100 F. 2/6

L2605-L2685-L2610
ELECTRICAL CHARACTERISTICS (Tj = 25 C, Vi = 14V, unless otherwise specified)
Symbol Vo Parameter Output Voltage Io = 500 mA Vi Vo Vo Vi-o Id Vo T Isc SVR Ro eN Output Short Circuit Current Supply Voltage Rejection Output Resistance Output Noise Voltage Vi = 16 f = 100 Hz Io = 500 mA BW = 100 Hz to 10 KHz Vi = 2 V Io = 500 mA Operating Input Voltage Line Regulation Load Regulation Dropout Voltage Quiescent Current Output Voltage Drift See Note (*) Io = 50 mA Vi = 14 V Io = 500 mA Io = 50 mA Io = 50 mA Vi = 14 V Tamb = - 12 to 80 C 20 -1 Vi = 12 to 20 V Io = 50 to 500 mA 2 4 Test Condition Vi = 12 to 16 V (L2605) Vi = 12 to 16 V (L2685) Vi = 12 to 16 V (L2610 Min. 4.80 8.15 9.60 Typ. 5.00 8.50 10.00 Max. 5.20 8.85 10.40 28 8 9 1.9 45 Unit V V mV/V mV/V V mA mV/C

1.1

1.8

A

60 0.05 20

dB V

(*) Note: For DC innput voltage 28 V
ELECTRICAL CHARACTERISTICS (- 40 Tj 125 C (note 2), Vi = 14 V, unless otherwise specified)
Symbol Vo Parameter Output Voltage Io = 500 mA Vi Vo Vo Vi-o Id Isc Operating Input Voltage Line Regulation Load Regulation Dropout Voltage Quiescent Current Output Short Circuit Current See Note () Io = 50 mA Vi = 14 V Io = 500 mA Io = 50 mA 29 1.1 Vi = 12.5 to 20 V Io = 50 to 500 mA, 5 3 13 Test Condition s Vi = 12.5 to 16 V (L2605) Vi = 12.5 to 16 V (L2685) Vi = 12.5 to 16 V 2610) Min. 4.70 8.00 9.40 Typ. 5.00 8.50 10.00 Max. 5.30 9.00 10.60 26 12 mV/V 2.5 65 2.1 V mA A Unit V V mV/V

Notes: (). For a DC input voltage 26 V < Vi < 35 V the device is not operating. 2. The limits are guarandeed by design correlation and statistical control on production samples over the indicated temperature and supply voltage ranges.

3/6

L2605-L2685-L2610
TO220 PACKAGE MECHANICAL DATA
DIM. MIN. A C D D1 E F F2 G H2 H3 L2 L3 L5 L6 L7 Dia 26.3 2.6 15.1 6 3.65 10.05 16.2 26.7 27.1 3 15.8 6.6 3.85 1.035 0.102 0.594 0.236 0.144 2.4 1.2 0.35 0.8 1.15 4.95 5.08 mm TYP. MAX. 4.8 1.37 2.8 1.35 0.55 1.05 1.4 5.21 10.4 10.4 0.396 0.638 1.051 1.067 0.118 0.622 0.260 0.152 0.094 0.047 0.014 0.031 0.045 0.195 0.200 MIN. inch TYP. MAX. 0.189 0.054 0.110 0.053 0.022 0.041 0.055 0.205 0.409 0.409

4/6

L2605-L2685-L2610
SOT82 PACKAGE MECHANICAL DATA
DIM. MIN. A B b b1 C c1 D e e3 F H 7.4 10.5 0.7 0.49 2.4 1.2 15.7 2.2 4.4 3.8 2.54 mm TYP. MAX. 7.8 10.8 0.9 0.75 2.7 MIN. 0.291 0.413 0.028 0.019 0.094 0.047 0.618 0.087 0.173 0.150 0.100 inch TYP. MAX. 0.307 0.425 0.035 0.030 0.106

5/6

L2605-L2685-L2610

Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. SGS-THOMSON Microelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of SGS-THOMSON Microelectronics. 1994 SGS-THOMSON Microelectronics - All Rights Reserved SGS-THOMSON Microelectronics GROUP OF COMPANIES Australia - Brazil - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands - Singapore Spain - Sweden - Switzerland - Taiwan - Thaliand - United Kingdom - U.S.A.

6/6