Text preview for : 4.DISASSEMBLY_AND_REASSEMBLY.pdf part of Samsung 4.DISASSEMBLY AND REASSEMBLY Samsung Dishwashers DW80H9970US_AA Service Manual 4.DISASSEMBLY_AND_REASSEMBLY.pdf
Back to : 4.DISASSEMBLY_AND_REASSEM | Home
3. DISASSEMBLY AND REASSEMBLY
3-1. TOOLS FOR REMOVAL AND REASSEMBLY
Type
10mm
* Preparation for parts replacement
Caution
Disassembly and Reassembly _ 9
3-2. PREPARATION FOR PARTS REPLACEMENT
Warning
Caution
Before servicing, make sure to remove all items from inside of the dishwasher, including the wash racks.
3-3. REMOVING THE UPPER RACK (IF NEEDED)
Step 1. Step 2. Step 3.
10 _ Disassembly and Reassembly
Part Figure Description
Preparation:
remove it.
Main PBA
Disassembly and Reassembly _ 11
Part Figure Description
Preparation:
Inverter PBA
12 _ Disassembly and Reassembly
Part Figure Description
Preparation:
Door outer
(DW80H9950US/
DW80H9940US)
Caution
Disassembly and Reassembly _ 13
Part Figure Description
Preparation:
Door outer
(DW80H9970US/
DW80H9930US)
Caution
14 _ Disassembly and Reassembly
Part Figure Description
Preparation:
Panel control
(DW80H9950US/
DW80H9940US)
Disassembly and Reassembly _ 15
Part Figure Description
Preparation:
front.
Panel control
(DW80H9970US)
16 _ Disassembly and Reassembly
Part Figure Description
Panel control
(DW80H9970US)
Disassembly and Reassembly _ 17
Part Figure Description
Preparation:
front.
Panel control
(DW80H9930US)
18 _ Disassembly and Reassembly
Part Figure Description
Panel control
(DW80H9930US)
Preparation:
Switch door
Disassembly and Reassembly _ 19
Part Figure Description
Preparation:
Assy Case Vent
Assy Dry Duct
section.
Assy Duct Condenser
Duct Dry
system
20 _ Disassembly and Reassembly
Part Figure Description
Duct Dry
system
Disassembly and Reassembly _ 21
Part Figure Description
Preparation:
Caution
Dispenser - slide
22 _ Disassembly and Reassembly
Part Figure Description
Lever door
Disassembly and Reassembly _ 23
Part Figure Description
Flow meter Inlet
Outlet
Water Level
< Assy case brake >
Preparation:
Assy Case Brake
Caution
Caution
24 _ Disassembly and Reassembly
Part Figure Description
UPPER NOZZLE
Preparation:
MIDDLE NOZZLE
LOWER NOZZLE
WATER WALL
Assy - Motion
3.
Disassembly and Reassembly _ 25
Part Figure Description
Assy - Motion
Caution
26 _ Disassembly and Reassembly
Part Figure Description
Preparation:
1.
Assy Duct
(Nozzle)
Disassembly and Reassembly _ 27
Part Figure Description
Preparation:
to separate
Drain Hose
28 _ Disassembly and Reassembly
Part Figure Description
Preparation:
section.
Water Valve
Caution
Caution
Disassembly and Reassembly _ 29
Part Figure Description
Preparation:
sensor connector.
Cover base
3.
30 _ Disassembly and Reassembly
Part Figure Description
Preparation:
Caution
Frame front
2.
3.
unit.
Disassembly and Reassembly _ 31
Part Figure Description
Preparation:
1.
Door Spring
2.
32 _ Disassembly and Reassembly
Part Figure Description
Preparation:
Caution
1.
Assy Cover base
2.
Disassembly and Reassembly _ 33
Part Figure Description
Preparation:
1.
Rear Leg +
Adjust bar 2.
3.
4.
34 _ Disassembly and Reassembly
Part Figure Description
Preparation:
1.
Thermister
2.
3.
Disassembly and Reassembly _ 35
Part Figure Description
Preparation:
1.
Turbidity sensor
2.
Caution
36 _ Disassembly and Reassembly
Part Figure Description
Preparation:
1.
2.
Caution
Circulation pump
4.
5.
Disassembly and Reassembly _ 37
Part Figure Description
Preparation:
Base
38 _ Disassembly and Reassembly
Part Figure Description
Preparation:
Caution
Ass'y Guide
water
3.
4.
Disassembly and Reassembly _ 39
Part Figure Description
Preparation:
Caution
1.
2.
Motor AC drive &
Switch micro
Preparation:
Caution
40 _ Disassembly and Reassembly
Part Figure Description
Preparation:
1.
2.
Drain
pump(MOTOR
BLDC PUMP)
Caution
Disassembly and Reassembly _ 41
Part Figure Description
Preparation:
1.
sump.
2.
Sump
3.
Caution
42 _ Disassembly and Reassembly
3-4. CHECKPOINTS AFTER FINISHING SERVICE
1. Check the safety device
2. Use authentic Samsung replacement parts only
3. Handling wires
4. The state of screws and nuts
5. Remove foreign material
6. Check for water leakage
7. Check the power cable
8. Check leveling
9. Check the installation location
Disassembly and Reassembly _ 43