Text preview for : modems.pdf part of apple modems apple misc modems.pdf
Back to : modems.pdf | Home
K Service Source
Modems
K Service Source
Take Apart
Modems
Take Apart Apple Data Modem 2400 - 1
Apple Data
Modem 2400
No preliminary steps are
required before you begin
this procedure.
Caution: Review the ESD
precautions in Safety/
Bulletins.
Note: This procedure
explains how to remove the
cover, the logic board, and
the speaker.
Take Apart Apple Data Modem 2400 - 2
Cover
1 Push in the two locking
tabs, and lift the cover
Tab until it clears the tabs.
2 Lift the back of the cover
up and forward until the
Tab
interior latch separates
from the case.
Take Apart Apple Data Modem 2400 - 3
Logic Board
You must first remove the
cover.
1 Remove the volume
Mounting Screw lever.
Light Pipe
Assembly 2 Remove the light pipe
Mounting Screw
assembly.
Replacement Caution:
Speaker The small, clear tabs on
Cable
Volume the bottom front of the
Lever light pipe assembly fit
into the holes in the case.
The assembly will break
if you force the larger
tabs into the holes.
Take Apart Apple Data Modem 2400 - 4
3 Disconnect the speaker
cable.
4 Remove the two
mounting screws.
Mounting Screw
Light Pipe
Assembly
Mounting Screw
Speaker
Cable
Volume
Lever
Take Apart Apple Data Modem 2400 - 5
5 Lift the logic board out of
the bottom case.
Logic Board
Take Apart Apple Data Modem 2400 - 6
Speaker
You must first remove the
following: