Text preview for : Disassembly & Reassembly.pdf part of Samsung Disassembly & Reassembly Samsung Plasma D72A chassis Disassembly & Reassembly.pdf



Back to : Disassembly & Reassembly. | Home

Disassembly & Reassembly



12. Disassembly & Reassembly
12-1 Overall Disassembly & Reassembly
Caution
- Be sure to separate the power cord before disassembling the unit.
- Discharge the capacitors first when separating PCB's with high capacity capacitors such as SMPS, X Drive Board, Y Drive Board,
etc. (Sparks may be generated by an electric charge, and there is a danger of electronic shock.)
- Check that the cables are properly connected referring to the circuit diagram, when disassembling or assembling the unit and
take care not to damage the cables.
- Take care not to damage the Glass Filter at the front.
- Assemble the boards in the reverse order of the disassembly.




12-1-1 Separation of Stand
Part Name Description Description Photo
Stand Place the unit down and remove the 4 screws to
separate the stand.
: BH,+,S,M4,L35,ZPC(BLK)
6009-001432

Caution: Take care not to damage the front glass
when placing the unit down.




Loosen and remove the screws and Stand remove.




Samsung Electronics 12-1
Disassembly & Reassembly


12-1-2 Separation of Cable Holder
Part Name Description Description Photo
Loosen and remove the 6 screws.
Cable
Holder




Loosen and remove the screws and Cable Holder
remove.




12-1-3 Separation of Sub Cover Back
Part Name Description Description Photo
Sub Cover Remove all marked screws
Back




Loosen and remove the screws and Cable
Holder remove.




12-2 Samsung Electronics
Disassembly & Reassembly


12-1-4 Separation of Audio Board
Part Name Description Description Photo
Audio Separate the cables connected to the Main Board
Board remove




Loosen and remove the 4 screws.




Separation of Power Button,Ambient Light
Sensor,IR Receiver PCB.




Samsung Electronics 12-3
Disassembly & Reassembly


12-1-5 Separation of Back Cover
Part Name Description Description Photo
Back Remove all marked screws
Cover




Take care not to damage the back cover when
removing it.




12-1-6 Separation of Function Key
Part Name Description Description Photo
Function Key Remove all marked screws




12-4 Samsung Electronics
Disassembly & Reassembly


12-1-7 Separation of Audio Board Sub Back
Part Name Description Description Photo
Audio Remove all marked screws
Board Sub
Back




Remove the Sub Back.




12-1-8 Separation of Power Inlet socket
Part Name Description Description Photo
Power Inlet Loosen and remove the 2 screws.
socket




Samsung Electronics 12-5
Disassembly & Reassembly


12-1-9 Separation of Speaker
Part Name Description Description Photo
Speaker Separate the cables connected to the Logic Board and
then remove the 4 screws.
: FH,+,M3,L10,NI PLT,SWRCH 18A,FP
6001-000321




Remove the speaker by carefully pulling it out with your
hands the speaker may cause damage to it.




12-1-10 Separation of Main SMPS, DC-DC SMPS
Part Name Description Description Photo
Separate the cables connected to the Main SMPS first
and then remove the screws.




Separate the cables connected to the DC-DC SMPS
and then remove the screws.




12-6 Samsung Electronics
Disassembly & Reassembly


12-1-11 Separation of LogicBoard, X DriveBoard, Y Drive Board, Buffer Board , Address Buffer Board
Part Name Description Description Photo
Board Separate the cables connected to the Logic Board and
then remove the screws.




Separate the cables connected to the X Drive Board
and remove the screws.




Separate the cables connected to the Y Drive Board
and remove the screws.




Separate the Y Buffer Board and the Address Buffer
Board depending on the problem




Samsung Electronics 12-7
MEMO




12-8 Samsung Electronics