Text preview for : TEK TDS 300 Reference.pdf part of Tektronix TEK TDS 300 Reference Tektronix TEK TDS 300 Reference.pdf
Back to : TEK TDS 300 Reference.pdf | Home
General purpose knob Miscellaneous controls
Cursor control Floppy disk drive Acquisition controls
Menu controls
Menu controls Vertical controls Trigger controls
Horizontal controls
Vertical Controls Horizontal Controls
CH 1 and CH 2 assign instrument control to the selected channel, POSITION moves the waveform horizontally.
indicated with a lighted LED.
HORIZONTAL MENU displays the menu choices for the horizontal
MATH displays the menu choices for the math operations and system.
activates the math waveform.
SCALE adjusts the horizontal scale.
REF1 and REF2 activate the reference waveforms and display the
menu choices for saving a waveform.
POSITION moves the waveform vertically.
VERTICAL MENU displays the menu choices for the vertical system. Trigger Controls
LEVEL selects the trigger level threshold.
SCALE adjusts the vertical scale.
TRIGGER MENU displays the menu choices for the triggering system.
WAVEFORM OFF clears the selected waveform from the display.
TRIG'D indicates that the oscilloscope is triggered on a signal.
READY indicates that the trigger circuit is ready to accept a trigger.
FORCE TRIGGER forces a single trigger regardless of trigger level.
SET LEVEL TO 50% sets the trigger level threshold to the midpoint of
the input signal.
Primary Menu Map
Side menu Side menu
CH 1 Ch1
CH 2 Ch2
Main menu Ext
Ext Ext/10
Ext/10 Pop-up AC Line
AC Line
Source
Field 1
DC Type Trigger On Field 2
Main menu AC Any Field
Video Scan Rate Lines
HF Reject Left-most
LF Reject main menu Mode 15