Text preview for : Installing-Logic-Board-3114.pdf part of apple Installing-Logic-Board-3114 apple Mac Desktops Mac Mini Mac mini Model A1347 Installing-Logic-Board-3114.pdf
Back to : Installing-Logic-Board-31 | Home
Installing Mac mini Model A1347 Logic Board
Installing Mac mini Model A1347 Logic Board
Step 1 - Logic Board
Remove the following three screws:
One 5.0 mm T8 Torx or 2.0 mm Hex screw (either
will work)
One 16.2 mm T6 Torx screw
One 26 mm T6 Torx standoff
Step 2
Carefully pull the wires for both hard drive thermal
sensors upward to lift their connectors up and out of the
sockets on the logic board.