Text preview for : hfe_onkyo_nc-500_service.pdf part of ONKYO hfe onkyo nc-500 service ONKYO Audio NC-500 hfe_onkyo_nc-500_service.pdf



Back to : hfe_onkyo_nc-500_service. | Home

NC-500

Ref. No. 3751
112002
SERVICE MANUAL


Audio Network Receiver
MODEL NC-500

AUDIO NETWORK RECEIVER
VOLUME
STANDBY / ON
AUDIO
INPUT




STANDBY
DISPLAY




SETUP




PHONES SELECT




NC- 500




Silver model only
TUDD 120V AC, 60Hz




SAFETY-RELATED COMPONENT
WARNING!!
COMPONENTS IDENTIFIED BY MARK ON THE
SCHEMATIC DIAGRAM AND IN THE PARTS LIST ARE
CRITICAL FOR RISK OF FIRE AND ELECTRIC SHOCK.
REPLACE THESE COMPONENTS WITH ONKYO
PARTS WHOSE PART NUMBERS APPEAR AS SHOWN
Restoring the factory default settings:
IN THIS MANUAL.
MAKE LEAKAGE-CURRENT OR RESISTANCE
To reset all the stored settings to the factory
MEASUREMENTS TO DETERMINE THAT EXPOSED default conditions, while the power to the NC-500
PARTS ARE ACCEPTABLY INSULATED FROM THE is on, press and hold down the STOP button on
SUPPLY CIRCUIT BEFORE RETURNING THE the unit, and press STANDBY/ON button.
APPLIANCE TO THE CUSTOMER.
NC-500

Specifications
Amplifier Section Tuner Section
Power output Tuning range
FTC 15 watts per channel, min RMS, at 8 ohms, FM: 87.50