Text preview for : hfe_onkyo_integra_dtr-40-6_basic_user_en.pdf part of ONKYO hfe onkyo integra dtr-40-6 basic user en ONKYO Audio Integra DTR-40 hfe_onkyo_integra_dtr-40-6_basic_user_en.pdf
Back to : hfe_onkyo_integra_dtr-40- | Home
DTR-40.6
Basic Manual
Advanced Manual found here
http://integraworldwide.com/manual/dtr406/adv/en.html
Before Start
About the Basic Manual Features Supplied Accessories
The Basic Manual leads you through the fundamental steps Equipped with 7 channel amplifier
to enjoy the AV Receiver from connections to TV, speaker THX Select2 Plus certified Indoor FM antenna --- (1)
system and playback components, to necessary functions Incorporates QdeoTM technology for HDMI video
for playback. As well as that, Basic Manual informs you with upscaling
the instructions on frequently used functions. Besides, there Equipped with 4K/60 Hz Passthrough-compatible HDMI AM loop antenna --- (1)
is another part of the manual called Advanced Manual to IN/OUT jacks (only IN1 to IN4 support 4K)
inform you with more detailed information, which we have Supports the HDMI Through function which allows
decided to publish on the web from the ecological point of transmission from playback devices to the TV in standby
view. state Color labels for speaker cable --- (1)
Speaker Cable
Supports HDCP2.2, a strict copy-protection for providing
1
2
3
high quality content (HDMI IN3/OUT MAIN only) Remote controller (RC-883M) --- (1)
Advanced Manual Supports ARC (Audio Return Channel) Batteries (AA/R6) --- (2)
Advanced Manual is always updated with the latest Supports USB storage playback
information and its user friendly interface, which does not Supports variety of network functions such as Internet
matter whether you access from PC or Smartphone, helps Radio, DLNA, etc. Power cord --- (1)
you to understand more deeply about the AV Receiver. Supports MHL-enabled mobile device
Advanced Manual is consisted of the following chapters. Bi-Amping capability
Details on AM/FM Playback Lip Sync function to correct deviation of audio and video Speaker setup microphone --- (1)
Playing Music Files on a USB Storage Device Multi-zone function which allows you to play a different
Listening to Internet Radio source in another room from the main room The number in parenthesis indicates the quantity. On packaging, the letter
Playing Music with DLNA 32 bit DSP (Digital Signal Processor) with excellent at the end of the product name indicates the color.
Playing Music Files in a Shared Folder calculation performance
Operating Music Files with the Remote Controller Music OptimizerTM for Compressed Digital Music files
Listening Mode Phase Matching Bass System How to use the remote controller
Advanced Settings Automatic speaker setup available using supplied
Operating Other Components with the Remote Controller calibrated microphone (AccuEQ Room Calibration)
Advanced Speaker Connection Supports playback of MP3, WMA, WMA Lossless, FLAC,
Connecting and Operating Onkyo RI Components WAV, Ogg Vorbis, Apple Lossless, DSD, Dolby TrueHD Remote control sensor
Control Function between the Unit and External Component via network and USB storage device (the supported AV Receiver
Firmware Update formats will differ depending on the use environment)
Troubleshooting ISF (Imaging Science Foundation) Video Calibration
Reference Information Batteries (AA/R6)
Approx.
16 ft. (5 m)
Advanced Manual found here If you do not use the remote controller for a long time, remove the
http://integraworldwide.com/manual/dtr406/adv/en.html batteries to prevent leakage.
Note that keeping consumed batteries inside may cause corrosion
resulting in damage of the remote controller.
2
Step 1: Connections
TV
Personal computer HDMI
IN
HDMI
OUT
To use the ARC function, connect to the
HDMI cable ARC compatible HDMI jack of the TV and
make an appropriate setting on the unit.
See "2nd Step : Source Connection" of
"Step 2: Setting Up".
HDMI
OUT
HDMI HDMI
HDMI OUT OUT Blu-ray Disc/
OUT
DVD player
Game console Set-top box/Digital Satellite/Cable
video recorder, etc. set-top box, etc.
1 Connecting the TV and players
For how to make settings, see the Advanced Manual (http://
integraworldwide.com/manual/dtr406/adv/en.html).
To connect the TV and the unit, connect the HDMI OUT
Connection with a TV not supporting ARC
MAIN jack of the unit and the HDMI IN jack of the TV using TV
Important: The power cord must be connected only after all AUDIO
other connections are completed. an HDMI cable. With this connection, it becomes possible to DIGITAL
OPTICAL
OUT
display the setting screen of the unit on the TV or transmit OUT
video/audio signals from the player to the TV. If your TV
HDMI cable connection supports ARC (Audio Return Channel), it is possible to
play the TV sound with the AV receiver's speakers with this
The unit has many HDMI jacks on its rear panel and each connection only. If your TV does not support ARC, you need,
of them corresponds to an input selector button of the same in addition to the HDMI OUT MAIN jack connection, a digital
Select an appropriate
name on the front panel. For example, a Blu-ray Disc player optical cable connection between the digital audio out optical connection for your TV.
will be connected to the IN 1 jack and the BD/DVD button jack of the TV and the DIGITAL IN OPTICAL jack of the unit
on the front panel will be used to listen to the playback or an analog audio (RCA) cable connection between the Another TV can be connected to the HDMI OUT SUB jack.
sound (if the player is CEC compliant, input will be switched audio output jack of the TV and the TV/CD analog audio In this case, change the setting accordingly. You can set up
automatically). If you add another Blu-ray Disc player, you input jack of the unit. by viewing the guidance displayed on the TV screen. Select
can use any other jack than IN 1. It is possible to change the item with the cursor buttons of the remote controller and
assignment of the input jacks and input selector buttons. press Enter to confirm your selection. Press Receiver and
3
Step 1: Connections
then Home on the remote controller, select "Setup" - "1. 2 Analog connection: Use an analog audio (RCA) cable 1 4 5
Input/Output Assign" - "Monitor Out" and set the default for connection with a player.
value of "MAIN" to "SUB" or "MAIN+SUB". With the sub To enjoy multi-zone playback of audio of a CD player or
output, the operation screen for Internet function or USB such other player without HDMI output jack, you need
playback can be displayed. It is also possible to use the to use the RCA cable to connect the corresponding
multi-zone function with this jack. For details, see the section jacks of the player and this unit. For details on the multi-
5 "Using the multi-zone function" of "Step 3: Playing Back". zone function, see the section 5 "Using the multi-zone
function" of "Step 3: Playing Back".
The unit supports the HDMI Through function that allows
transmission from players to the TV even if the unit is in
standby. You have to modify the settings to enable the input Analog audio (RCA) cable
selection link with CEC compliant device, connection with
ARC compatible TV, and HDMI Through function. See "2nd
3 Connection with turntable: If it uses an MM type
Step : Source Connection" of "Step 2: Setting Up".
cartridge and does not have a built-in audio equalizer,
To enjoy HDCP2.2 protected video, connect the player to
connect it to the 3 PHONO jack. If the connected
the IN3 jack and the TV to the HDMI OUT MAIN jack of
turntable has a built-in audio equalizer, connect it to the
the unit. Your player and TV need to support HDCP2.2.
2 TV/CD jack.
To play 4K or 1080p video, use the high speed HDMI If it uses an MC type cartridge, install an audio equalizer compatible
cable. with MC type cartridge between the unit and the turntable by
It is possible to send video and audio of an MHL- connecting it to the 2 TV/CD jack. For details, refer to the turntable's
instruction manual. 3 2
enabled mobile device by connecting the MHL-enabled If the turntable has a ground wire, connect it to the GND terminal of
mobile device to the AUX Input HDMI/MHL jacks on the this unit. If connecting the ground wire increases noise, disconnect it.
front panel. Video signals input to the composite video input
Video signal connection jack or the COMPONENT VIDEO input jacks will be
upconverted to HDMI signals and then output from
The unit has a video upconversion function. For details, see the HDMI output jack.
Connecting Components without HDMI Note that it is not possible to convert digital audio
the section on the right.
input signals to analog or vice versa.
If your AV component does not have HDMI jack, use an 4 Use a component video cable to connect a TV with
available jack of your component for cable connection with component video input jacks and a player with component
this unit. Just as the HDMI jacks, other jacks on this unit video output jacks.
have a preassigned input selector button on the front panel.
See the name of the input selector button shown with the Component video cable
jack when connecting the device. Its transmitted video has higher quality than
that of composite video cable.
Audio signal connection
5 Use a composite video cable to connect a TV with
1 Digital connection: Use a digital optical cable composite video input jack or a player with composite
(OPTICAL) or digital coaxial cable (COAXIAL) for
video output jack.
connection with a player.
Composite video cable
Digital optical cable (OPTICAL) AV Receiver
As the digital in optical jack of the unit has a
cover, push in the cable of the player against When you upconvert video signals input to the
the cover as it is turned inside. COMPONENT VIDEO jacks and output them from the
HDMI OUT jack, set the output resolution of the player
Digital coaxial cable (COAXIAL) to 480i/576i. If the input has 480p/576p or higher
resolution, a message prompting you to change the
resolution setting will appear. If your player does not
support 480i/576i output, use the composite video jack.
If multiple video signal inputs are put into one input
system, the output will be made in the order of HDMI,
component video, and composite video.
4
Step 1: Connections
2 Connecting speakers
2
Front R
1
Front L
Important: The power cord must be connected only after all 3
Center
other connections are completed.
12 3 9F 6
45
78
12 Front speakers
3 Center speaker
45 Surround speakers
6 Subwoofer
78 Surround back speakers
9F Height speakers
5.1 ch: 1 2 3 4 5 6 If there is only one
7.1 ch: 1 2 3 4 5 6 + 7 8 or surround back
123456+9F speaker, connect it to
Up to two subwoofers can be connected. the BACK or HEIGHT
L terminal.
To use the multi-zone function, see the section 5 "Using
the multi-zone function" of "Step 3: Playing Back".
6 6 5 8F 79 4
Subwoofer with built- Subwoofer with built- Surround R Surround back/ Surround back/ Surround L
in power amplifier in power amplifier height R height L
Important: and press Enter to confirm your selection. To return to the
You have to modify the setting if any of the speakers have previous screen, press Return. Press Receiver and then
Home on the remote controller. Select "Setup" - "2.Speaker
viewing the guidance displayed on the TV screen. Select Setup" - "Speaker Settings" - "Speaker Impedance" and
the item with the cursor buttons of the remote controller change the default value from "6ohms" to "4ohms".
5
Step 1: Connections
1/2"-5/8"(12-15 mm)
When using commercially available banana plugs: Network connection
tighten the speaker terminals to the end and then insert the
banana plugs. Do not insert the cable core directly into the You can enjoy Internet radio and DLNA by connecting the
hole for banana plug of speaker terminal. unit to LAN. Connect the Ethernet cable to the Ethernet
(North American model) port of the router.
Cut and remove the plastic coating from the end of the
speaker cable, twist the core and connect it to the terminal.
Internet radio
Make correct connection between the unit's jacks and
speaker's jacks (+ to + and - to -) for each channel. If
connection is wrong, a bass sound may become poor due to
reverse phase. Attaching the supplied colored speaker cable
labels to the + side on the both ends of each channel's cable
will help correct connection. The subwoofer jack supports
connection of a subwoofer with built-in power amplifier. Set
the cut-off filter selection switch of the subwoofer to DIRECT.
3 Other connections
Router
PC
If the subwoofer does not have a cut-off filter selection
switch but has a cut-off frequency adjusting dial, turn it to the AM/FM antenna connections
maximum frequency. If your subwoofer does not have built-in
power amplifier, you can connect a power amplifier between Connect the antennas to listen to AM/FM broadcast. When NAS
the unit and the subwoofer. listening to the broadcast for the first time, adjust the
The speaker setting is 7.1 ch at the time of purchase. antenna position and orientation to get the best reception.
You can change it manually or by using automatic
speaker setting. Headphones connection
Short-circuiting the + cable and - cable or contacting the AM loop antenna (supplied)
cable core to the rear panel of the unit may cause failure. Connect stereo headphones with a standard plug (1/4
Also do not connect two or more cables to one speaker inch or