Text preview for : 070-3573-00_MSDU_ACE_1.x_may81.pdf part of Tektronix 070-3573-00 MSDU ACE 1.x may81 Tektronix 85xx 856x 070-3573-00_MSDU_ACE_1.x_may81.pdf
Back to : 070-3573-00_MSDU_ACE_1.x_ | Home
8500
MODULAR MOL SERIES
Advanced CRT-Oriented
'11
~
Editor
USERS MANUAL
Version 1.X
COMMITTED TO EXCELLENCE
This manual supports the This software module is
following TEKTRONIX products: compatible with:
8550 DOS/50 Version 1.X
Options Products
1S 8300C01
PLEASE CHECK FOR CHANGE INFORMATION
AT THE REAR OF THIS MANUAL.
8500
MODULAR MDL SERIES
Advanced CRT-Oriented
Editor
USERS MANUAL
Version 1.X
Tektronix, Inc.
P.O. Box 500
Beaverton, Oregon 97077 Serial Number _ _ _ _ _ _ __
070-3573-00 First Printing MAY 1981
LIMITED RIGHTS LEGEND
Software License No. _ _ _ _ _ _ _ _ _ _ _ _ __
Contractor: Tektronix, Inc.
Explanation of Limited Rights Data Identification Method
Used: Entire document subject to limited rights.
Those portions of this technical data indicated as limited rights data shall not,
without the written permission of the above Tektronix, be either (a) used,
released or disclosed in whole or in part outside the Customer, (b) used in whole
or in part by the Customer for manufacture or, in the case of computer software
documentation, for preparing the same or similar computer software, or (c) used
by a party other than the Customer, except for: (i) emergency repair or overhaul
work only, by or for the Customer, where the item or process concerned is not
otherwise reasonably available to enable timely performance of the work,
provided that the release or disclosure hereof outside the Customer shall be
made subject to a prohibition against further use, release or disclosure; or (ii)
release to a foreign government, as the interest of the United States may
require, only for information or evaluation within such government or for
emergency repair or overhaul work by or for such government under the
conditions of (i) above. This legend, together with the indications ofthe portions
of this data which are subject to such limitations shall be included on any
reproduction hereof which includes any part of the portions subject to such
lim itations.
RESTRICTED RIGHTS IN SOFTWARE
The software described in this document is licensed software and subject to
restricted rights. The software may be us~d with the computer for which or with
which it was acquired. The software may be used with a backup computer ifthe
computer for which or with which it was acquired is inoperative. The software
may be copied for archive or backup purposes. The software may be modified or
combined with other software, subject to the provision that those portions of the
derivative software incorporating restricted rights software are subject to the
same restricted rights.
Copyright