Text preview for : packing.PDF part of Tektronix packing Tektronix TEK CTS850 Test Set Reference packing.PDF
Back to : packing.PDF | Home
Appendix I: Packing for Shipment
If you ship the CTS850, pack it in the original shipping carton and
packing material. If the original packing material is not available,
package the instrument as follows:
1. Obtain a corrugated cardboard shipping carton with inside
dimensions at least 15 cm (6 in) taller, wider, and deeper than the
CTS850. The shipping carton must be constructed of cardboard
with 170 kg (375 lb) test strength.
2. If you are shipping the CTS850 to a Tektronix field office for
repair, attach a tag to the CTS850 showing the instrument owner
and address, the name of the person to contact about the
instrument, the instrument type, and the serial number.
3. Wrap the CTS850 with polyethylene sheeting or equivalent
material to protect the finish.
4. Cushion the CTS850 in the shipping carton by tightly packing
dunnage or urethane foam on all sides between the carton and the
CTS850. Allow 7.5 cm (3 in) on all sides, top, and bottom.
5. Seal the shipping carton with shipping tape or an industrial
stapler.
CTS850 SDH Test Set User Manual I 1
Appendix I: Packing for Shipment
I 2 CTS850 SDH Test Set User Manual