Text preview for : Procedure for Built-In Raster Aging, Color Bars, & White Patterns (C_P0216).pdf part of Sony CPD-200GS _ CPD200ES Schematics
Back to : cpd200.part1.rar | Home
Sony Service Company National Technical Services A Division of Sony Electronics Inc. Park Ridge, New Jersey 07656
CONFIDENTIAL
Service Bulletin Computer Monitors
No.
CSI-111
Model:
CPD-110GS, CPD-210GS, CPD-100ES, CPD200ES, CPD-100GS, CPD-200GS, CPD-220GS, CPD-101VS, CPD-201VS, CPD-420GS, CPD520GS, GDM-200PS, GDM-400PS, GDM-500PS
216R1
Subject: Procedure for Built-In Raster Aging, Color Bars, & White Patterns Symptom: (1181)
Date: February 17, 2000
The unit has come in for service. Raster Aging is necessary for warming the unit prior to adjusting set up. The Color Bars and White Patterns are useful for testing symptoms. The Built-In Raster Aging, Color Bars, and White pattern modes should be used for these purposes. Special procedures are required to enable the Built-In Raster Aging, Color Bars, and White pattern functions.
Solution:
Please refer to the following procedures to put the unit into the Built-In Raster Aging, Color Bar pattern, and White pattern modes. Use the procedures listed for the particular model. The times listed are approximate. BUILT-IN RASTER AGING CPD-100ES, CPD-200ES: 1. Connect AC cable and turn On Power Button. 2. Remove Video Cable. Wait for Power Save. 3. Hold the " Brightness + " button in for 2 seconds. CPD-110GS, CPD-210GS, CPD-100GS, CPD-200GS, CPD-220GS, CPD-101VS, CPD-201VS, CPD-420GS, CPD-520GS, GDM-200PS, GDM-400PS, GDM-500PS: 1. Connect AC cable and turn On Power Button. 2. Remove Video Cable. Wait for Power Save. 3. Hold the " Menu " button in for 2 seconds.
BUILT-IN COLOR BARS PATTERN CPD-110GS, CPD-210GS, CPD-100ES, CPD-200ES: 1. Connect AC cable and turn On Power Button. 2. Remove Video Cable. Wait for Power Save. 3. Hold the " Contrast + " button in for 2 seconds. CPD-100GS, CPD-200GS, CPD-220GS, CPD-101VS, CPD-201VS, CPD-420GS, CPD-520GS, GDM-200PS, GDM-400PS, GDM-500PS: 1. Connect AC cable and turn On Power Button. 2. Remove Video Cable. Wait for Power Save. 3. Hold the " Contrast " button in for 2 seconds. CONT.
Reference: S. Adachi, J. Grose
PRINTED IN USA
Computer Monitors Service Bulletin No. 216R1
BUILT-IN WHITE PATTERN CPD-110GS, CPD-210GS: NA CPD-100ES, CPD-200ES: 1. Connect AC cable and turn On Power Button. 2. Remove Video Cable. Wait for Power Save. 3. Hold the " Contrast - " button in for 2 seconds. CPD-100GS, CPD-200GS, CPD-101VS, CPD-201VS, CPD-420GS, CPD-520GS, GDM-200PS, GDM-400PS, GDM-500PS: 1. Connect AC cable and turn On Power Button. 2. Remove Video Cable. Wait for Power Save. 3. Hold the " Contrast " button in for 2 seconds. The set up procedure is completed.