Text preview for : hfe_daewoo_xg-315_service_en.pdf part of Daewoo hfe daewoo xg-315 service en Daewoo Audio XG-315 hfe_daewoo_xg-315_service_en.pdf



Back to : hfe_daewoo_xg-315_service | Home

S/N No. : 9CD8302400



Service Manual
Mini Component System

Model: X G - 3 1 5 MINI COMPONENT SYSTEM

XG-315



Table of Contents

SAFETY PRECAUTIONS ..................................................................................... 2~3
ADJUSTMENTS ........................................................................................................ 4
EXPLODED VIEW AND PARTS LIST ......................................................... 5~6
WIRING DIAGRAM ................................................................................. 7
BLOCK DIAGRAM ............................................................................. 8
SCHEMATIC DIAGRAM ..................................................................................... 9~13
"
TUNER/TAPE/AMP/POWER .............................................................................. 9
"
MP3 CD ............................................................................................................. 10
XG-315
"
FRONT .............................................................................................................. 11

PCB PATTERN LAYOUT ...................................................................................12~15
"
MAIN ................................................................................................................. 12
"
MP3 CD ............................................................................................................. 13
"
FRONT .............................................................................................................. 14
"
POWER ............................................................................................................. 15
ELECTRICAL PART LIST .......................................................................... Appendix




DAEWOO DAT CO., LTD. 1
APR. 2004
FEB. 2004
Safety Precautions Safety Precautions
13.Outdoor Antenna Grounding - If an outside antenna is 15.Object and Liquid Entry - Care should be taken so that objects
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE laundry tub, in a wet basement, or near a swimming pool,
connected to the receiver be sure the antenna system is do not fall and liquids are not spilled into the enclosure through
THIS APPLIANCE TO RAIN OR MOISTURE. and the like.
grounded so as to provide some protection against voltage openings.
2. Carts and Stands - The appliance
CAUTION PORTABLE CART surges and built-up static charges. Article 810 of the National 16.Damage Requiring Service - The appliance should be
should be used only with a cart or
RISK OF ELECTRIC SHOCKS Electrical Code, ANSI/NFPA 70, provides information with serviced by qualified service personnel when:
stand that is recommended by th
DO NOT OPEN regard to proper grounding of the mast and supporting a) The power-supply cord or the plug has been damaged; or
manufacturer.
3. An appliance and cart combination structure, grounding of the lead-in wire to an antenna-dis b) Objects have fallen, or liquid has been spilled into the
charge unit, size of grounding conductors,location of antenna- appliance; or
CAUTION :TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT should be moved with care. Quick
discharge unit, connection to grounding electrodes and c) The appliance has been exposed to rain; or
REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS stops, excessive force, and uneven
INSIDE. requirements for the grounding electrode. See Figure 1. d) The appliance does not appear to operate normally or
surfaces may cause the appliance
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. exhibits a marked change in performance; or
and cart combination to overturn.
Figure 2 4. Wall or Ceiling Mounting - The appli- e) The appliance has been dropped, or the enclosure
THIS SYMBOL IS INTENDED TO ALERT THE USER TO THE EXAMPLE OF ANTENNA
damaged.
PRESENCE OF UNINSULTED "DANGEROUS VOLTAGE" ance should be mounted to a wall or GROUNDING ANTENNA LEAD
IN WIRE
17.Servicing - The user should not attempt to service the
WITHIN THE PRODUCT'S ENCLOSURE THAT MAY BE ceiling only as recommended by the manufacturer.
appliance beyond that described in the operating instructions.
SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF 5. Ventilation - The appliance should be situated so that its
GROUND CLAMP All other servicing should be referred to qualified service
ELECTRIC SHOCK TO PERSONS. location or position does not interfere with its proper ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20) personnel.
ventilation. For example, the appliance should not be situated
THIS SYMBOL IS INTENDED TO ALERT THE USER TO THE ELECTRIC
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE on a bed, sofa, rug, or similar surface that may block the SERVICE
EQUIPMENT
GROUND CLAMPS
(SERVICING) INSTRUCTIONS IN THE LITERATURE ventilation openings; or, placed in a built-in installation, such
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
ACCOMPANYING THE APPLIANCE. as a bookcase or cabinet that may impede the flow of air NEC - NATIONAL ELECTRICAL CODE (NEC ART 250 PART H)

through the ventilation openings.
CAUTION 14.Non-use Periods - The power cord of the appliance should be
6. Heat - The appliance should be situated away from heat
TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS POLARIZED AC unplugged from the outlet when left unused for a long period
sources such as radiators, heat registers, stoves, or other
PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET of time.
UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE appliances (including amplifiers) that produce heat.
EXPOSURE. 7. Power Sources - The appliance should be connected to a
power supply only of the type described in the operating
LASER SAFETY instructions or as marked on the appliance.
THIS UNIT EMPLOYS A LASER. ONLY QUALIFIED SERVICE PERSONNEL
8. Grounding or Polarization - The precautions that should be
SHOULD REMOVE THE COVER OR ATTEMPT TO SERVICE THIS DEVICE
DUE TO POSSIBLE EYE INJURY. taken so that the grounding or polarization means of an
appliance is not defeated.
CAUTION : USE OF ANY CONTROLS, ADJUSTMENTS, OR PROCEDURES 9. Power - Cord Protection - Power-supply cords should be
OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS routed so that they are not likely to be walked on or pinched
RADIATION EXPOSURE. by items placed upon or against them, paying particular
attention to cords at plugs, convenience receptacles, and the
CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF
point where they exit from the appliance.
PLUG TO WIDE SLOT, FULLY INSERT.
10.Protective Attachment Plug - If the appliance is equipped with
ATTENTION : POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE an attachment plug having overload protection. This is a
LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPON- safety feature. See Instruction Manual for replacement or
DANTE DE LA PRISE ET POUSSER JUSQU'AU FOND. resetting of protective device. If replacement of the plug is
required, be sure the service technician has used a
replacement plug specified by the manufacturer that has the
Important Safety Instructions same overload protection as the original plug.
- All the safety and operating instructions should be read before 11.Cleaning - The appliance should be cleaned only as
the appliance is operated. recommended by the manufacturer.
- The safety and operating instructions should be retained for 12.Power Lines - An outdoor antenna should be located away
future reference. from power lines.
- All warnings on the appliance and in the operating instructions
should be adhered to.
- All operating and use instructions should be followed.
1. Water and Moisture - The appliance should not be used near
water - for example, near a bathtub, washbowl, kitchen sink,




2 3
Adjustments
1. TAPE SECTION
Output Level
Measurement Input Point
Point Scope

R-CH 47 kohm

VTVM
Input Level
Measurement
Point

L-CH 47 kohm

Test Tape be used
Tape Contents Use
MTT-111N 3 KHz Tape Speed Adjustment
MTT-114N 10 KHz Head Azimuth Adjustment
MTT-5511 Blank Record Frequency Property
HEAD ADJUSTMENT (AZIMUTH)
1. 10KHz test tape(example: MTT-114N) must be used for this adjustment.
2. Connect to VTVM or oscilloscope to the headphone jack or speaker terminal.
3. Press the play button.
4. Adjust the azimuth by using a screw driver to maintain the max. L&R output voltage.
5. Adjust tape A(1), tape B(2) respectively, Please secure the azimuth position by using locking paint.
RECORDING BIAS OSCILLATOR FREQUENCY ADJUSTMENT
1. Connect the frequency counter to TP603, GND.
2. Press the REC button.
3. Adjust L600 to obtain 80 KHz