Sharp bulletin 51Cs03H-002.pdf part of Sharp Sharp_Bulletins_2 Sharp_Bulletins_2.zip, Sharp_Bulletins

Text preview for : Sharp bulletin 51Cs03H-002.pdf part of Sharp Sharp_Bulletins_2 Sharp_Bulletins_2

Back to : Sharp_Bulletins_2.zip | Home

CTV970201
Date of Issue : Classification : 10/02/97 White Page 1 of 1

TELEVISION TECHNICAL BULLETIN

MODELS

51CS03H 66CS05H

59CS03H 51CS05H

66CS03H 59CS05H

SYMPTOM The set remains in the standby mode. CAUSE ACTION Crack on the PWB due to transport damage. If there is no 300VDC across C708, then check the continuity between L703 and the cathode of D704. If this is open circuit, fit a wire link between the two points as indicated in the diagram below.

Location of wire link on the component side of the PWB

Sharp Electronics (UK) Limited CE Technical Support Group Originator White - Carry out as required

$Y: Supervisor 3*- Approval Date 10/02/97

UK64601Y Red - Carry out on all units

Yellow - Carry out as required and whenever unit comes in for service