Text preview for : default.PDF part of Tektronix default Tektronix TEK CTS850 Test Set Reference default.PDF



Back to : default.PDF | Home

Appendix C: Default Factory Settings

Table C 1 lists the instrument settings after Default Factory Settings
have been recalled.
CTS 850 SDH/PDH Test Set

Table C 1:Default Factory Settings

Parameter Default Value
Transmit Rate STM-1E
Transmit Clock Internal
Transmit Level 6dB
AU Under Test 1
Mapping Bulk Fill No Mapping (Equipped)
Transmit Test Pattern PRBS 2^23 1
Transmit Overhead Path Trace This is a Tektronix CTS Test Set
Transmit Overhead External Add None
Transmit Error Rate None
Transmit Error Type None
Transmit Alarm None
Transmit Failure None
Transmit Pointer/Timing Mode Pointer Movements
Transmit Pointer Type AU
Transmit Pointer Control Single
Transmit Pointer Value 522
Transmit Pointer Set with New Data Flag Yes
APS Mode SPAN
Receive Rate STM-1E



CTS 850 SDH/PDH Test Set User Manual C 1
Appendix C: Default Factory Settings




Table C 1:Default Factory Settings (Cont.)

Parameter Default Value
Receive Level Cross Connect
Receive AU Under Test 1
Receive Mapping No Mapping (Equipped)
Receive Tributary Drop Off
Receive Test Pattern PRBS 2^23 1
Test Duration Continuous
Receive Path Overhead External Drop None
Beeper Off
Display Brightness Medium, high
Printer Type TEK DPU-411
Print User & Company Off




C 2 CTS 850 SDH/PDH Test Set User Manual