Text preview for : TDSUSB2QuickReference.pdf part of
| Home
Getting Started with TDSUSB2 The application displays results as a summary and as an
eye diagram as shown below.
You can use this side of the Quick Reference to start taking
measurements with the USB2.0 Compliance Test Package
(TDSUSB2). The other side contains a complete menu tree
for TDSUSB2 software.
NOTE. For complete operating instructions
and General Safety information, refer to the
Online Help for the application.
4. Select Measurement > Configure and set up the
The package includes an application (Universal Serial Bus
application in the Configure and Source tabs.
measurements software) and an optional USB2.0
comprehensive compliance test fixture.
The design of the package helps you to test if USB2.0
devices meet the compliance test requirements of the
USB2.0 industry for physical layer measurements. The
package supports these tests: Signal Quality, Inrush current
test, Droop test, Chirp and Receiver sensitivity testing,
Suspend, Resume, Reset from High Speed, Reset from
Suspend, and Packet Parameter tests.
Performing Signal Quality Test
1. Select File > Run Application > in the oscilloscope
menu bar. Then select TDSUSB2.0 Test Package,
App > USB2.0 Test Package, or
Analyze > USB2.0 Test Package.
2. Connect the device under test (DUT) to the Device SQ 6. Select Results > Details to view the results in a statistical
section of the test fixture. format.
5. Push the "Running Man" button to start taking
measurements.
Generating a Compliance Report
To produce a compliance test report, select Utilities > Report
Generator.
For up-to-date information on Tektronix oscilloscope
solutions for USB2.0 compliance testing, access the
3. Select Measurement > Select and choose a test for the www.tektronix.com/Measurement/scopes/ Web page.
appropriate signal speed (Low, Full or High speed).
TDSUSB2 Ordering Information If you order TDSUSBF
This application supports TDS5000/B (except TDS5052/B H USB 2.0 Compliance Test Fixture only
and TDS5032/B), TDS6604, TDS6404, TDS6604B,
TDS6804B, TDS6124C, TDS6154C, TDS/CSA7000/B, Recommended Accessories
DPO7000, and DPO70000 series oscilloscopes; refer to the H TDSUSBF USB2.0 Compliance Test Fixture
Optional Applications Software on Windows-Based
Oscilloscopes Installation Manual for a list of specific H DTG5000 series with the M21 module
models. The applications CD includes a PDF file of the H DG2040 Data Generator*
installation manual.
H AWG610 Arbitrary Waveform Generator*
If you order Option USB with a new oscilloscope: H TDS8000 series oscilloscope with an 80E04 Time Do-
H USB 2.0 Universal Serial Bus Measurements Software is main Reflectometer (TDR) Sampling Module
installed and enabled H P6248 Differential Probe
To order for an existing Windows-based oscilloscope: H TCP202 or TCP0030 Current Probe
H Order the CSA7UP Option USB (software only) H P6245, TAP1500 or P6243 Single-Ended Probes
H Order the CSA7BUP Option USB (software only) * DG2040 and AWG610 are discontinued.
H Order the TDS5UP Option USB (software only)
NOTE. To test High Speed USB2.0 devices,
H Order the TDS5BUP Option USB (software only) you can use this application with DPO7254,
H Order the TDS6UP Option USB (software only) DPO/DSA70404, DPO/DSA70604,
DPO/DSA70804, DPO/DSA72004, TDSUSB2
H Order the TDS6BUP Option USB (software only)
DPO/DSA71604, DPO/DSA71254, Universal Serial Bus Package
H Order the TDS7UP Option USB (software only) TDS6404, TDS6804B, TDS6604/B,
H Order the TDS7BUP Option USB (software only) TDS6804B, TDS6124C, TDS6154C, Reference
TDS7404/B, CSA7404/B, TDS7704B, and
H Order the DPO7UP Option USB (software only) TDS7254/B oscilloscopes.
www.tektronix.com
*P071188203*
071-1882-03
TDSUSB2 Menu Tree
Recall Default Eye Diagram
OK
Recall Signal Rate
Apply Paired JK Jitter
Save Cancel
Preferences General | Advanced Paired KJ Jitter
File
Recently Recalled Signal Quality Check Consecutive Jitter
Recently Saved EOP Width
Minimize CrossOver
Device IDs
Exit Rise Time
Device Description
Fall Time
Generate Automatic IDs
Low Speed | Full Speed Select All
Inrush Inrush Current
Droop Droop Test
Configure Eye Diagram
Select Signal Rate
Monotonic Property
Signal Quality Check EOP Width
Rise Time
Receiver Sensitivity Fall Time
Chirp Select All
Inrush Inrush Current
Measurements
High Speed
Droop Droop Test
Device IDs Receiver Sensitivity
Device Description Suspend
Generate Automatic IDs
Chirp
More
Configure Resume
Configure
Reset from High
Speed
Reset from
Suspend
Packet
Parameter
Upstream
Downstream
Near End
Run Tier Far End
Control Menu Hide Signal Direction
Exit Configure Test Point Rise Time / Fall Time
Configure Levels Monotonic Property
Signal Quality Check Configure Limits
Max
Live/Ref Min
Source Default
From File (Browse)
Set
Tier Cancel
V bus
Configure
Device Type Differential
Configure Inrush Current Check Configure Limits Single Ended
Qualify Channel
Source Live / Ref From File (Browse)
V bus Source Manual Entry
Bus Powered Max
Self Powered Min
Max Default
Min Set
Port Cancel
Hub Default
Droop Test Set
Configure Limits
Select Source Cancel
Live / Ref From
File (Browse)
Receiver Sensitivity Source
Live
Source Live/Ref EL_33, EL_34
Chirp Host
EL_35
Configure DUT
Device EL_28, EL_29, EL_31
Suspend Source Live/Ref
/Resume Upstream
Configure Signal
Direction Downstream
Reset from
Source Live/Ref
Suspend/
Reset from
Configure Signal Upstream
Resume
Direction
EL_21, EL_23,EL_25
Source Live/Ref Host
Packet EL_22
Parameter Configure EL_55
DUT
Summary Device EL_21, EL_22,EL_25
Eye Diagram
EL_22
Results Waveform Plot
Details Eye Diagram Source
Waveform Plot Ref Level
Hysteresis
From | To
Deskew Slope Rise
Edges Fall
Perform Deskew
Tektronix Specific
Utilities Report Format Plug-Fest Specific
Generation CSV Format
Report Generator
Report Directory (Browse)
Automatic
Report file name
Manual
Generate
CSV File Type
CSV CSV Source D+ (Browse)
TSV File Generator
Live D- (Browse)
TSV Destination File (Browse)
Help Topics Convert
Help
About TDSUSB2
Copyright Tektronix, Inc.