Text preview for : Disassembly & Reassembly.pdf part of
| Home
3. Disassembly and Reassembly
3. Disassembly and Reassembly
This section of the service manual describes the disassembly and reassembly procedures for the UN40B7000WM LCD TV.
WARNING: This monitor contains electrostatically sensitive devices. Use caution when handling these components.
3-1. Disassembly and Reassembly
Cautions: 1. Disconnect the monitor from the power source before disassembly.
2. Follow these directions carefully; never use metal instruments to pry apart the cabinet.
Description Picture Description Screws
1. Place monitor face down on cushioned table.
Remove screws from the Stand.
Remove stand.
3-1
3. Disassembly and Reassembly
Description Picture Description Screws
2. Remove the screws of rear-cover. 40"
46"/55"
3. Lift up the rear-cover.
3-2
3. Disassembly and Reassembly
Description Picture Description Screws
4. Remove the cables and screws from 40"
SMPS, Main board and Woofer and
Bracket stand link.
46" / 55"
Woofer x 2
3-3
3. Disassembly and Reassembly
Description Picture Description Screws
5. Remove the panel bracket screws from the
panel.
Reassembly procedures are in the reverse order of disassembly procedures.
3-4