Text preview for : hfe_onkyo_integra_dtr-70-6_basic_user_en.pdf part of ONKYO hfe onkyo integra dtr-70-6 basic user en ONKYO Audio Integra DTR-70 hfe_onkyo_integra_dtr-70-6_basic_user_en.pdf
Back to : hfe_onkyo_integra_dtr-70- | Home
DTR-70.6
Basic Manual
Advanced Manual found here
http://integraworldwide.com/manual/dtr706/adv/en.html
En
Before Start
About the Basic Manual Features Supplied Accessories
The Basic Manual leads you through the fundamental steps Equipped with 11 ch amplifier
to enjoy the AV Receiver from connections to TV, speaker Supports playback in Dolby Atmos format which provides Indoor FM antenna --- (1)
system and playback components, to necessary functions 360-degree placement and movement of sounds
for playback. As well as that, Basic Manual informs you with including overhead sound
the instructions on frequently used functions. Besides, there Dolby Surround listening mode expands 2 ch, 5.1 ch or AM loop antenna --- (1)
is another part of the manual called Advanced Manual to 7.1 ch source to available speaker configurations
inform you with more detailed information, which we have THX Select2 Plus certified
decided to publish on the web from the ecological point of Incorporates QdeoTM technology for HDMI video Color labels for speaker cable --- (1)
Speaker Cable
view. upscaling
1
2
3
All HDMI jacks support displays of 4K resolution at 60 Hz
Remote controller (RC-883M) --- (1)
Supports the HDMI Through function which allows
Advanced Manual Batteries (AA/R6) --- (2)
transmission from playback devices to the TV in standby
Advanced Manual is always updated with the latest state
information and its user friendly interface, which does not Supports HDCP2.2, a strict copy-protection for providing Power cord --- (1)
matter whether you access from PC or Smartphone, helps high quality content (HDMI IN3/OUT MAIN only)
you to understand more deeply about the AV Receiver. Supports ARC (Audio Return Channel)
Advanced Manual is consisted of the following chapters. Supports USB storage playback Speaker setup microphone --- (1)
Details on AM/FM Playback Supports variety of network functions such as Internet
Playing Music Files on a USB Storage Device Radio, DLNA, etc. The number in parenthesis indicates the quantity. On packaging, the letter
Listening to Internet Radio Supports MHL-enabled mobile device at the end of the product name indicates the color.
Playing Music with DLNA Bi-Amping capability
Playing Music Files in a Shared Folder A/V Sync Function to correct deviation of audio and video
Operating Music Files with the Remote Controller Multi-zone function which allows you to play a different How to use the remote controller
Listening Mode source in another room from the main room (Video can
Advanced Settings also be played in Zone 2)
Operating Other Components with the Remote Controller 32 bit DSP (Digital Signal Processor) with excellent
Advanced Connection calculation performance Remote control sensor
Connecting and Operating Onkyo RI Components AV Receiver
Music OptimizerTM for Compressed Digital Music files
Control Function between the Unit and External Phase Matching Bass System
Component Automatic speaker setup available using supplied
Firmware Update calibrated microphone (AccuEQ Room Calibration) Batteries (AA/R6)
Troubleshooting Supports playback of MP3, FLAC, WAV, Ogg Vorbis,
Reference Information Apple Lossless, DSD via network and USB storage About 16
device (the supported formats will differ depending on ft. (5 m)
the use environment)
ISF (Imaging Science Foundation) Video Calibration If you do not use the remote controller for a long time, remove the
batteries to prevent leakage.
Advanced Manual found here Note that keeping consumed batteries inside may cause corrosion
http://integraworldwide.com/manual/dtr706/adv/en.html resulting in damage of the remote controller.
2
Step 1: Connections
TV
Personal computer
HDMI
IN
HDMI
OUT
HDMI cable To use the ARC function, connect to the ARC
compatible HDMI jack of the TV and make an
appropriate setting on the unit. See "2nd Step :
Source Connection" of "Step 2: Setting Up".
HDMI
OUT
HDMI HDMI
HDMI OUT Blu-ray Disc/DVD player
OUT
OUT
Game console Set-top box/Digital Satellite/Cable
video recorder, etc. set-top box, etc.
1 Connecting the TV and players
For how to make settings, see the Advanced Manual.
To connect the TV and the unit, connect the HDMI OUT
MAIN jack of the unit and the HDMI IN jack of the TV
Audio connection with a TV not supporting ARC
Select an appropriate
connection for your TV.
Important: The power cord must be connected only after all using an HDMI cable. With this connection, it becomes TV
AUDIO
other connections are completed. possible to display the setting screen of the unit on the DIGITAL
OPTICAL
OUT
TV or transmit video/audio signals from the player to the OUT
TV. If your TV supports ARC (Audio Return Channel), it
HDMI Cable Connection is possible to play the TV sound with the AV receiver's
speakers with this connection only. If your TV does not
The unit has many HDMI jacks on its rear panel and each support ARC, you need, in addition to the HDMI OUT MAIN
of them corresponds to an input selector button of the same jack connection, a digital optical cable connection between
name on the front panel. For example, a Blu-ray Disc player the digital audio out optical jack of the TV and the DIGITAL
will be connected to the IN 1 jack and the BD/DVD button IN OPTICAL jack of the unit or an analog audio (RCA)
on the front panel will be used to listen to the playback cable connection between the audio output jack of the TV In this case, press Monitor Out on the main unit several
sound (if the player is CEC compliant, input will be switched and the TV/CD analog audio input jack of the unit. times to display "SUB" or "MAIN+SUB" and select the
automatically). If you add another Blu-ray Disc player, you
output method. You can also enjoy using Zone function with
can use any other jack than IN 1. It is possible to change
the HDMI OUT ZONE 2 jack. For details, see the section 5
assignment of the input jacks and input selector buttons.
"Using the multi-zone function" of "Step 3: Playing Back".
3
Step 1: Connections
The unit supports the HDMI Through function that allows Audio signal connection 5 Use a composite video cable to connect a TV with
transmission from players to the TV even if the unit is in composite video input jack or a player with composite
standby. You have to modify the settings to enable the input 1 Digital connection: Use a digital optical cable video output jack.
selection link with CEC compliant device, connection with (OPTICAL) or digital coaxial cable (COAXIAL) for
ARC compatible TV, and HDMI Through function. See "2nd connection with a player. Composite video cable
Step : Source Connection" of "Step 2: Setting Up".
To enjoy HDCP2.2 protected video, connect the player to Digital optical cable (OPTICAL) 6 Use an analog RGB cable to connect the unit with a PC.
As the digital in optical jack of the unit has a
the IN3 jack and the TV to the HDMI OUT MAIN jack of cover, push in the cable against the cover as it is
the unit. Your player and TV need to support HDCP2.2. turned inside. Analog RGB cable
To play 4K or 1080p video, use the high speed HDMI
cable. Digital coaxial cable (COAXIAL) Video signals from the PC connected with the PC IN port will be
It is possible to send video and audio of an MHL-enabled output only to a TV connected with the HDMI OUT MAIN/SUB jack.
mobile device by connecting the MHL-enabled mobile 2 Analog connection: Use an analog audio (RCA) cable
device to the AUX Input HDMI/MHL jack on the front for connection with a player.
panel. To enjoy multi-zone playback of audio of a CD player
or such other player without HDMI output jack, you
Video signals input to the composite video input jack,
need to use the analog audio (RCA) cable to connect
the COMPONENT VIDEO input jack, or the PC IN
Connecting Components without HDMI the corresponding jacks of the player and this unit. port will be upconverted to HDMI signals and then
For details on the multi-zone function, see the section output from the HDMI output jack. Note that it is
If your AV component does not have HDMI jack, use an 5 "Using the multi-zone function" of "Step 3: Playing not possible to convert digital audio input signals to
available jack of your component for cable connection with Back". analog or vice versa.
this unit. Just as the HDMI jacks, other jacks on this unit
have a preassigned input selector button on the front panel. Analog audio (RCA) cable
See the name of the input selector button shown with the
jack when connecting the device.
3 Connection with turntable: If it uses an MM type
1 5 4 6 cartridge and does not have a built-in audio equalizer,
connect it to the 3 PHONO jack. If the connected
turntable has a built-in audio equalizer, connect it to the
2 TV/CD jack.
If it uses an MC type cartridge, install an audio equalizer compatible
with MC type cartridge between the unit and the turntable by
connecting it to the 2 TV/CD jack. For details, refer to the turntable's
instruction manual.
If the turntable has a ground wire, connect it to the GND terminal of
this unit. If connecting the ground wire increases noise, disconnect it.
AV Receiver
Video signal connection
If multiple video signal inputs are put into one input
The unit has a video upconversion function. For details, see system, the output will be made in the order of HDMI,
the next section. component video, and composite video.
4 Use a component video cable to connect a TV
with component video input jacks and a player with
component video output jacks.
3 2 Component video cable
Its transmitted video has higher quality than that
of composite video cable.
4
Step 1: Connections
2 Connecting speakers
Although Height 1 speakers can
enhance surround effects, we
recommend you to add Height 2
Using Dolby Enabled Speakers
speakers in order to ensure full effects.
Speaker Layout Install Height speakers such as Front
High and Rear High speakers on the
upper part of the front or rear wall. There
F are other types of Height speakers.
a b
9 c d
Wide speakers: Placing IJ speakers
makes the front sound field even wider. It
" J also give smoother transitions between e f
front and back surround sounds.
#
I $
' &
Height Speakers Arrangements
(Dolby Atmos) ab Dolby Enabled Speaker (Front)
cd Dolby Enabled Speaker (Surround)
% H There are several types of Height speakers ef Dolby Enabled Speaker (Back)
other than those mentioned in the previous
G section. See the next section "Combination
8 A Dolby Enabled Speaker is specially
patterns for Height speakers 1 and 2" and designed to be used as a Height speaker.
select the combination pattern from those There are two types of Dolby Enabled
7 specified for Height speakers 1 and Height Speakers, the one is to be placed on the
speakers 2. top board of other speakers such as front
This unit performs optimal sound speakers and surround speakers, and the
field processing for the type of Height other is integrated type with the normal
speakers 1 and 2 which is registered speakers. Dolby Enabled Speakers designed
in initial settings (with setup wizard) with their output facing toward the ceiling to
according to an actual speaker layout. create an elevated audio effect in the Dolby
To enjoy the Dolby Atmos listening mode, 5.1 ch: Connect the speakers Note that the optimal effect cannot be Atmos and Dolby Surround listening modes
Height 1 speakers, Surround back speakers "#$%&' to the unit. "# output front achieved if you place height speakers in by providing sounds echoing off the ceiling.
or Wide speakers need to be installed. stereo sound. $outputs center sounds a combination pattern other than those
such as dialogs and vocals. %& create specified.
back sound field. ' reproduces bass Dolby recommends to place the Installing speakers in ceiling
" # Front speakers sounds and creates rich sound field. Up to speakers as described in "Installing
$ Center speaker 4 subwoofers can be connected to the unit. speakers in ceiling" to obtain the best k l
% & Surround speakers Dolby Atmos effect. i j
' Subwoofer Surround back speakers: Placing 78 g h
7 8 Surround back speakers speakers allows playback in 7.1 ch
9 F Height 1 speakers (Front High) configuration that improves sense of
G H Height 2 speakers (Rear High) envelopment created by back sound field.
I J Wide speakers It also improves seamlessness of back
GH and IJ share the same speaker sounds and provides more natural sound
terminals. Select either of the groups. experiences in the sound field.
To use the multi-zone function, see the
section 5 "Using the multi-zone function" Height speakers 1 and 2: Placing 9F or
of "Step 3: Playing Back". GH speakers produce surround effects on
a height plane. gh Top Front
To enjoy the Dolby Atmos listening ij Top Middle
mode, Height 1 speakers or Surround kl Top Rear
back speakers need to be installed.
5
Step 1: Connections
Ceiling speakers, etc. are used for maximizing effects in & 8 7 %
Dolby Atmos or Dolby Surround listening mode. Install Surround R Surround back R Surround back L Surround L
Top Front speakers midway between the position just
above the listening position and the position just above
the front speakers. Install Top Middle speakers just above
the listening position. Install Top Rear speakers midway If you use only one surround
back speaker, connect it to
between the position just above the listening position and the BACK L terminal.
the position just above the surround back speakers.
Combination patterns for Height speakers 1 and 2
Dolby recommends the following combination pattern
to obtain the best effect of Dolby Atmos and Dolby
Surround listening modes.
Pair 1: Top Middle
Pair 2: Top Front / Top Rear
The following are the patterns of Height speakers 2 that
can be selected according to the type of Height speakers 1.
Height speakers 1: Front High
Height speakers 2: Not Use/Top Middle/Rear High/Dolby
Enabled Speaker (Surround)/Dolby Enabled Speaker (Back)
Height speakers 1: Top Front
Height speakers 2: Not Use/Top Rear
Height speakers 1: Top Middle F H " # G 9 $
Height1 R Height2 R/ Front R Front L Height2 L/ Height1 L Center
Height speakers 2 cannot be used. J I
Wide R Wide L
Height speakers 1: Dolby Enabled Speaker (Front)
Height speakers 2: Not Use/Dolby Enabled Speaker
(Surround)/Dolby Enabled Speaker (Back) Instructions on How to Connect Speakers 1/2"-5/8"(12-15 mm)
Height speakers 1: Dolby Enabled Speaker (Surround) Important
You have to change the setting if any of the speakers have
Height speakers 2 cannot be used.
Cut and remove the plastic coating from the end of the
up by viewing the guidance displayed on the TV screen. speaker cable, twist the core and connect it to the terminal.
Height speakers 1: Dolby Enabled Speaker (Back) Press Receiver and then Home on the remote controller. Make correct connection between the unit's jacks and
Select "Setup" - "2. Speaker Setup" - "Speaker Settings" - speaker's jacks (+ to + and - to -) for each channel. If
Height speakers 2 cannot be used.
"Speaker Impedance" and change the default value from connection is wrong, a bass sound may become poor
When front speakers are bi-amp connected, you can "6ohms" to "4ohms". due to reverse phase. Attaching the supplied colored
select a pattern for Height speakers 2 from the following Select the item with the cursors of the remote controller speaker cable labels to the + side on the both ends of each
options. and press Enter to confirm your selection. To return to the channel's cable will help correct connection.
Not Use/Front High/Top Front/Top Middle/Dolby Enabled previous screen, press Return.
Speaker (Front)/Dolby Enabled Speaker (Surround)/
Dolby Enabled Speaker (Back)
6
Step 1: Connections
Connecting the Subwoofer When using commercially available banana plugs: Network Connection
Up to four subwoofers with built-in power amplifier can tighten the speaker terminals to the end and then insert the
be connected to the subwoofer jacks. Set the cut-off banana plugs. Do not insert the cable core directly into the You can enjoy Internet radio and DLNA by connecting the
filter selection switch of the subwoofer to DIRECT. If the hole for banana plug of speaker terminal. (North American unit to LAN. Connect the Ethernet cable to the Ethernet
subwoofer does not have a cut-off filter selection switch model) port of the router.
but has a cut-off frequency adjusting dial, turn it to the
maximum frequency. If your subwoofer does not have built-
Internet radio
in power amplifier, you can connect a power amplifier
between the unit and the subwoofer.
3 Other connections
Router
PC
AM/FM Antenna Connections
Subwoofer with built-in
power amplifier
Connect the antennas to listen to AM/FM broadcast. When NAS
listening to the broadcast for the first time, adjust the antenna
position and orientation to get the best reception.
Headphones Connection
The speaker setting is 7.2 ch at the time of purchase. You AM loop
can change it manually or by using automatic speaker antenna
setting. (supplied)
or