Text preview for : Installing-IR-Board--Cable-1106.pdf part of apple Installing-IR-Board--Cable-1106 apple Mac Desktops Mac Mini Mac mini Model A1176 Installing-IR-Board--Cable-1106.pdf



Back to : Installing-IR-Board--Cabl | Home

Installing Mac mini Model A1176 IR Board & Cable




Installing Mac mini Model A1176 IR Board & Cable
Tools used in this guide
1.5" Thin Putty Knife
Phillips #00 Screwdriver
Spudger
Tweezers



Step 1 - Top Housing
You can skip this step if you bought your
putty knife from iFixit. Putty knives
purchased from iFixit come with pre-ground
edges.
You'll need a putty knife in order to open the case. A
1.5 inch thin putty knife will work well, but you'll want to
grind the edge down. Rub the putty knife's short edge
back and forth on a sheet of all purpose rough grit
sandpaper (100 grit will work fine) until it attains a
beveled edge.