Text preview for : 06_nvram.pdf part of Xerox Phaser 740 wanted service manual
Back to : 740.part1.rar | Home
Resetting NVRAM
Resetting NVRAM returns all the image processor's NVRAM-stored parameters to their factory defaults except the print counts and the Adobe firmware serial number. To reset the image processor to its factory default values, follow this procedure:
1. Turn the printer off. 2. Press and hold the front panel Buttons 1 (Exit) and 4. 3. Turn the printer on. 4. When the front panel displays the message NVRAM Default, release Buttons
1 and 4.
5. At this point the message password? will be displayed. Within 10 seconds,
press Buttons 1 (Exit) and 3 at the same time. The NVRAM parameters will be reset to their factory default values. If you do not press buttons 1 and 3 in the allotted time, the NVRAM will not be changed.
Service Guide
67
68
Phaser 740 Color Printer