confi740.pdf part of Xerox Phaser 740 740.part1.rar, wanted service manual text manual preview

Text preview for : confi740.pdf part of Xerox Phaser 740 wanted service manual

Back to : 740.part1.rar | Home

The Configuration Page
To provide further diagnostic information, the printer is able to print a Configuration Page. The Configuration Page lists the values the printer stores in its NVRAM. These values can be informative when troubleshooting the printer, particularly networked operations. The Configuration Page gives information such as:
s

General information about the printer, such as page count, the printer name, Ethernet address, time-outs, number of fonts. Details regarding installed memory Color settings such and Vivid Color. Parallel port settings LocalTalk port settings EtherTalk settings Token Ring settings TCP/IP settings Novell NetWare settings

s s s s s s s s

Phaser 740 Online Service Information

BACK TO MAIN

1

Configuration page settings for a Phaser 740 printer
Parameter Printer type Printer name Description The name of the product. The current name of the printer as seen on a network Saved in Default NVRAM yes yes Phaser 740 same as the name of the product 0 No Limits or alternate choices

Any name defined by the customer up to 31 characters in length

Total number of print jobs processed through the image processor. Startup Page Indicates if the printer prints a Startup enabled Page upon power-up. Serial number Unique number for each printer Ethernet A unique number for each Ethernetaddress capable printer. PostScript Firmware level of the PostScript version interpreter code. Firmware Firmware level of the print engine, image version processor, operating system and network card code. Fonts in ROM Number of font stored in the printers ROM memory. Job Timeout Amount of time a job can take to process. Wait Timeout Amount of time the image processor waits for additional data from a host.

Pages printed

yes yes yes yes

Yes

Hardwaredependent

Legal values have the form xx:xx:xx:xx:xx:xx

yes

OS x.xx, PS x.xx, Eng x.xx, Net x.xx 136

yes

0 seconds

yes

40 seconds

Any value denoted in seconds. 0 means unlimited amount of time Any value greater than 14 denoted in seconds; 0 means unlimited amount of time

Phaser 740 Online Service Information

BACK TO MAIN

2

Configuration page settings for a Phaser 740 printer (cont'd.)
Parameter Manual Feed Timeout Energy Star timeout Check Print Enabled Check Print Timeout RAM memory Print Quality Description The amount of time the printer waits for a user to manually insert a sheet of media for a manual feed print job. Amount of idle time allowed before the printer switches to a low energy power down mode. Indicates if Check Print mode is enabled. Requires extended feature activation. Amount of time the printer waits for confirmation before cancelling a Check Print job. Total amount of RAM on the image processor board. Indicates the combined setting of the /OutputMode and /HWResolution. Indicates the type of color adjustments used to simulate different color uses. Saved in Default NVRAM yes 60 seconds Limits or alternate choices Any integer value; 0 means unlimited amount of time Any integer from 1 to 4 denoting hours. No

yes

1 hour

yes

Yes

yes

300 seconds

8 Mbytes yes Standard

Any integer from 1 to 60480 denoting seconds. 0 means unlimited amount of time 12, 16, 24, 40, 56 or 72 Fast Monochrome, Fast Color, Presentation, Standard, Enhanced, Premium Automatic, Balanced Color, Vivid Color, Display, SWOP Press, Euroscale Press, Commercial Press, Raw CMYK, Raw RGB Not installed, Disabled, ASCII, Raw, TBCP

Color Correction

yes

None

Parallel Port interpreter Parallel Port Encoding

Indicates the type of interpreters in use at the port. Indicates the type of data encoding the parallel port is inspecting.

yes yes

PostScript Level 3 Binary

Phaser 740 Online Service Information

BACK TO MAIN

3

Configuration page settings for a Phaser 740 printer (cont'd.)
Parameter Parallel Port back channel Handshaking IDE Disk Size Execute Sys/ Start Job Boot Delay Description Saved in Default NVRAM None Limits or alternate choices Serial B, Serial C, ... , or Parallel, Parallel B, Parallel C, ...

The device used for standard output and yes standard error. Setting whether unidirectional or bidirectional communication is used. Indicates if the internal hard drive is installed. Indicates the size of the drive and the amount of free space. Determine whether or not to run the yes system start file during system initiation. Number of seconds the printer waits yes before booting up the attached hard drive. Indicates the type of interpreter in use at yes the port. Indicates the type of printer installed at the port. Indicates the LocalTalk network node number of the printer. Indicates if a SCSI disk is attached to the printer. Also indicates its storage capacity and the amount of free space. yes no

Run 0

Skip Any positive integer

Polling LocalTalk port interpreter LocalTalk Printer Type LocalTalk Node SCSI Disk

PostScript Level 3 LaserWriter 0

Not installed, Disabled, Any string 32 characters in length or less Any integer, 1 through 254

Not connected Online, total space, free space

Phaser 740 Online Service Information

BACK TO MAIN

4

Configuration page settings for a Phaser 740 printer (cont'd.)
Parameter Execute Sys/ Start Job Boot Delay Description Determine whether or not to run the system start file during system initiation. Number of seconds the printer waits before booting up the attached hard drive. If true, data parity should be checked. SCSI address of disk for the SCSI communication channel. SCSI address of printer when it is the initiator. Indicates if a scanner is attached to the printer Indicates the type of interpreter in use at the port Indicates the type of printer installed at the port Indicates the LocalTalk network node number of the printer Saved in Default NVRAM yes yes Run 0 Limits or alternate choices Skip Any positive integer

Check parity Disk Address Printer address Scanner LocalTalk port interpreter LocalTalk Printer Type LocalTalk Node Network Information Version Time Time Source

no no no yes

False 6 7

True 0 to 7 0 to 7

PostScript Level 2 LaserWriter 0

Not installed, Disabled, Any string 32 characters in length or less Any integer 1 through 254

yes no

Integer 1 to 255 Source of the time set in printer, such as a remote computer dialog box Set at factory Clock not set

Phaser 740 Online Service Information

BACK TO MAIN

5

Configuration page settings for a Phaser 740 printer (cont'd.)
Parameter Last Config Time SysAdmin contact Printer Location PhaserShare Network Address Description Last date the printer's configurations were altered Name of system administrator Physical location of printer as set by system administrator Indicates the type of Phaser Share network card installed A unique number for each Ethernetcapable printer. Saved in Default NVRAM yes yes yes no yes none Empty string Empty string LocalTalk, Ethernet, Token Ring Limits or alternate choices

EtherTalk EtherTalk Network Filtering Delayed Output Close Name

Indicates the type of interpreter in use at yes the port. The EtherTalk protocol address yes assigned at boot time for routing. Interpretation of special characters yes yes The current name of the printer as seen on a network yes

Hardwaredependent. Legal values have the form xx:xx:xx:xx:xx: xx PostScript Not installed, Disabled, Level 2 0 Integer 1 through 65534 None yes Phaser 840N, Phaser 840DP, Phaser 840DX Interpreter-based no Any name defined by the customer up to 32 characters in length.

Phaser 740 Online Service Information

BACK TO MAIN

6

Configuration page settings for a Phaser 740 printer (cont'd.)
Parameter Printer type Zone Description Indicates the type of printer installed at the port. Name assigned by network administrator for the zone the printer is assigned to. Indicates the EtherTalk address of a printer on the network. Indicates which IPX frame types the printer accepts Saved in Default NVRAM LaserWriter yes * Limits or alternate choices Any string, 32 character or less Any string, 32 characters or less Integer 1 through 253

EtherTalk Node IPX IPX Networks Ethernet 802.2 Ethernet 802.3 Ethernet II Ethernet SNAP TokenTalk interpreter Token Ring Address Speed

yes

0

yes yes yes yes yes Indicates the type of interpreter in use at yes the port. A unique number for each printer. based yes on the printer's ID. Data transmission speed the network yes card is set to. Set by a jumper on the card. (Jumper not installed equals 16 Mbps, jumper installed equals 4 Mbps).

Enabled Enabled Enabled Enabled Enabled PostScript Level 2 None 16 Mbps

Disabled Disabled Disabled Disabled Disabled Not installed, Disabled, Any valid token ring address 4 Mbps

Phaser 740 Online Service Information

BACK TO MAIN

7

Configuration page settings for a Phaser 740 printer (cont'd.)
Parameter Bridging Description Token Ring source routing. Saved in Default NVRAM yes Adaptive (printer determines route based on data) False Limits or alternate choices Transparent (no source routing), SourceRoute (use source routing)

All Routes Broadcast Connection State Early Token Release Firmware Version Printer type

The printer sends response packets back to the host indicating all possible routes to the printer. Indicated if the printer is connected or inserted into the token ring. The printer releases the token at the end of the last byte transmitted (not applicable a 4 Mbps). Firmware version of the printer's Token Ring network card.

yes

True

yes yes

Inserted On

No Cable, Cable connected, Removed, Duplicated Address Off

yes LaserWriter yes *

X.XX
Any string, 32 character or less Any string, 32 characters or less Integer assigned by network

Indicates the type of printer installed at the port. Zone Name assigned by network administrator for the zone the printer is assigned to. Network Node Indicates the Token Ring address of the printer on the network. NetWare port interpreter Language Indicates the type of interpreters in use at the port. Filtering Interpretation of special characters
Phaser 740 Online Service Information

yes

0

yes yes

Auto Select None

Disabled, Interpreter-based

BACK TO MAIN

8

Configuration page settings for a Phaser 740 printer (cont'd.)
Parameter Description Saved in Default NVRAM yes yes yes TEK01B009, hardware dependant 2 - Bindery Limits or alternate choices no

Delayed Output Closed Print Server Name of printer server. Name Connection Mode Preferred DS Tree Login Password Enable Banners Config Retry Interval Queue Scan Interval TCP/IP port interpreter Host Name IP Address 1 - Directory Services, 2 - Bindery, 3 - Directory and Bindery Services Directory Services Tree where printer initially connects Indicates whether or not a network password has been set. Print banner

user-defined

yes yes yes yes

1 - Directory Services, 3 Directory and Bindery Services Max length 48 bytes Set, Not set

Not set No 60 seconds 15 seconds

Time in seconds to wait before retrying yes to configure Rate at which printer will scan queue for yes print jobs. Indicates the type of interpreter in use at yes the port. The Internet Protocol address. If null, the address will be set at run time via RARP or BOOTP. yes

An integer 1 through 300 in seconds Not authorized, Disabled

Not Set

String of 15 or fewer characters of the format N.N.N.N followed by the word "Dynamic" if IP Address Dynamic parameter is set to true. 9

Phaser 740 Online Service Information

BACK TO MAIN

Configuration page settings for a Phaser 740 printer (cont'd.)
Parameter Description Saved in Default NVRAM yes Default Limits or alternate choices String of 15 or fewer characters of the format N.N.N.N

Network Mask Indicates which fields of the IP Address designate the network portion and which designate the node portion. If null, the mask will be determined from the printer's IP address or the BOOTP or ICMP Netmask Reply. Broadcast The IP Address used to broadcast Address messages on the local network. If null, the value will be determined from the IP Address and Network Mask at runtime. Gateway A list of addresses of the gateways to Address(es) other networks. Ethernet Data packet encapsulation type for ARP/ Frame Type RARP requests and IP datagrams. RARP Reverse Address Resolution Protocol/ Boot Parameter Protocol. Used for setting the printer's IP address from a boot server. BOOTP/ Used for setting the printer's IP address DHCP from a boot server IP Address Indicates from what source the IP Source address was obtained SMTP Server Host that email notification will deal with SMTP Destination of email error messages Reverse Path DNS
Phaser 740 Online Service Information

yes

Default

String of 15 or fewer characters of the format N.N.N.N

yes yes yes

None DIX False

String of 15 or fewer characters of the format N.N.N.N Adaptive, 802.2-SNAP. May be followed by the word "Dynamic" True

yes yes yes yes

False

True

Empty field Empty field

16 charaters 80 characters

BACK TO MAIN

10

Configuration page settings for a Phaser 740 printer (cont'd.)
Parameter Primary Server Secondary Server Search Domain Names(s) LPR Filtering Delayed Output Closed Host Access List AppSocket port interpreter Language Description Provides the IP address of the primary Domain Name Services server Addition source of IP address for a Domain Name Services server Local domain name of DNS resolver Saved in Default NVRAM None None None 256 characters Limits or alternate choices This is overridden by BOOTP/ DHCP

Interpretation of special characters

yes yes yes

None yes

Interpreter-based no Unrestricted

List of TCP/IP network addresses for host access to printer

Filtering Delayed Output Closed Host Access List of TCP/IP network addresses for List host access to printer Syslog Protocol that acts as a remote front panel to the printer.

Indicates the type of interpreter in use at yes the System V configured port. Interpretation of special characters yes yes yes yes

Auto Select None yes

Not Authorized, Disabled, Interpreter-based no Unrestricted Not Authorized,

Phaser 740 Online Service Information

BACK TO MAIN

11

Configuration page settings for a Phaser 740 printer (cont'd.)
Parameter Log Hosts Log Priority Description Saved in Default NVRAM Send no messages 5 Limits or alternate choices List of IP addresses in the format N.N.N.N 0 unit is no longer usable, 1 messages indicating action is needed on part of system administrator, 2 critical error messages, 3 error message, 4 warning messages, 5 normal but significant message, 6 informational messages, 7 debugging messages Not Authorized,

List of address of host that want to yes receive syslog messages. The threshold indicating the priority level yes of messages from the printer that will be sent to the list of log host(s).

SNMP

Trap Hosts

Allow the printer to respond to status queries from host-resident SNMP utilities. A list of hosts, one for each protocol, which are able to receive traps.

yes

yes

None

Authentication If enabled, the printer sends a trap for Failure Traps SNMP authentication failure. HTTP Local URL Address Indicates if HTTP support has been enabled

yes yes yes

Enabled Enabled

None, N.N.N.N/Public, N.N.N.N/Proxy, N.N.N.N/ Private, N.N.N.N/Regional, N.N.N.N/Core Disabled Disabled

Phaser 740 Online Service Information

BACK TO MAIN

12

Configuration page settings for a Phaser 740 printer (cont'd.)
Parameter HTTP Password Refresh Delay FTP Language Indicates if FTP support has been enabled Interpretation of special characters Description Saved in Default NVRAM yes yes yes yes yes yes Auto Select None yes Not set Not Authorized, Disabled, Interpreter-based no Set Not set Limits or alternate choices Set

Filtering Delayed Output Closed Login Password Telnet Language Indicates if Telnet support has been enabled Protocol Delayed Output Closed Login Password Email status Indicates if email notification is activated Notification Sys/Admin Email address of printer's system Email Address administrator Service Email Email address of printer's service Address provider
Phaser 740 Online Service Information

yes yes yes yes yes yes yes

Auto Select None yes Not set Not Enabled Empty field Empty field

Not Authorized, Disabled, Set no Set Enabled 256 byte field 256 byte field

BACK TO MAIN

13

Configuration page settings for a Phaser 740 printer (cont'd.)
Parameter Key User Email Address Email to Tektronix Remote Internet Printing Language Filtering Delayed Output Closed POP3 Server IP Address POP3 User Name POP3 Password POP3 Polling Interval Printing Password Authorized Hosts Description Email address of printer's key operator Indicates if email about basic printer usage can be emailed to Tektronix Indicates of remote printing, PhaserLink printing, is enabled Saved in Default NVRAM yes yes Empty field No Not Enabled Limits or alternate choices 256 byte field Yes Enabled

Indicates the language interpreter in use yes at the patrallel port Interpretation of special characters yes yes Backup SMTP server IP address POP3 login user name POP3 login password Interval printer waits before checking for new mail Password required for using internet printing feature List of host connections allowed to use internet printing feature yes yes yes yes yes yes

PostScript None yes Empty field Empty field Empty field 3 minutes Not Set Empty field

AutoSelect, PCL Interpreter-based no

40 byte field 40 byte field 1 to 32767 Set 256 byte field

Phaser 740 Online Service Information

BACK TO MAIN

14

Configuration page settings for a Phaser 740 printer (cont'd.)
Parameter Authorized Users PDF Direct printing Printing password Proxies Enabled HTTP: Proxy Server HTTP Proxy Port FTP Proxy Server FTP Proxy Port No proxy for: Description Saved in Default NVRAM Empty field No Enabled Not set No Empty field Empty field Empty field Empty field Limits or alternate choices 256 byte field Enabled Set Yes

List of email names allowed to use yes internet printing feature Indicates if direct printing of downloaded yes PDF files is enabled Password required for using internet yes printing feature yes yes yes yes yes yes

Phaser 740 Online Service Information

BACK TO MAIN

15