Text preview for : 071338600_2268-RMK-1_2.pdf part of Keithley 071338600 2268-RMK-1 2 Keithley 2268 071338600_2268-RMK-1_2.pdf
Back to : 071338600_2268-RMK-1_2.pd | Home
REVISIONS DENOTE SIZE m-N in-lb ITEM PART NUMBER DESCRIPTION QTY
ZONE REV. DESCRIPTION DATE APPROVED A M3 0.8 - 0.9 7-8 10 9370378-02R CHASSIS,6-40V,GREY 1
A INITIAL RELEASE PER EC-010033 10/06/14 G. STAPP B M4 1.8 - 2.0 16 - 18 13 9370381-02R COVER,TOP,GREY 1
C 8-32 2.0 - 2.2 18 - 20 A 21 110-M3F-05 SCREW,M3 X 5,PFH,SS 22
58 9370071-02R BRACKET,RACK MTG,GREY 2
59 MH-8125-BA HANDLE,RND,1.25",AL,BLK,ANODZ 2
C 60 110EG20-08 SCREW,8-32 X .500,PFH,100D,SS 4
B 61 060-3029 SCREW,M4X6,FLAT,PHIL,SS,DIN965 4
73 9370427-02R PLATE,RK MNT CONN,GREY 1
74 9370072-02R PLATE,FRONT,RACK KIT,GREY 1
75 109-704-25 FOAM,1 INCH,SQ,ADH,2-SIDE,WHT 2
21 8X
13
ASSEMBLY STEPS: (UNIT CAN BE INSTALLED EITHER LEFT OR RIGHT SIDE)
1. INSTALL THE FRONT COVER PLATE, ITEM 74, TO THE CHASSIS, ITEM 10,
USING (2X) M3 SCREWS, ITEM 21.
UNIT 2. INSTALL THE TOP COVER, ITEM 13, TO THE CHASSIS USING (8X) M3 SCREWS,
ITEM 21.
2X .125 3. INSTALL THE CONNECTOR PLATE, ITEM 73, TO THE UNDERSIDE OF
BOTH CHASSIS USING (12X) M3 SCREWS, ITEM 21.
4. INSTALL THE HANDLES, ITEM 59, TO THE RACK BRACKETS, ITEM 58,
3.0 USING (4X) 8-32 FLAT HEAD SCREWS, ITEM 60.
75 2X 5. INSTALL THE RACK BRACKETS USING (4X) M4 FLAT HEAD SCREWS, ITEM 61.
NOTE UNLESS OTHERWISE SPECIFIED:
1. USE RECOMMENDED TORQUE FOR ALL FASTENERS.
3.0
10
73
2X 21
60 4X
74 61 4X
12X 21 2X 59 58 2X
ASSEMBLY INSTRUCTION, RACK MOUNT,SINGLE, PAGE 1 OF 2 October 06, 2014 Document No. 071338600 Rev A
DENOTE SIZE m-N in-lb ITEM PART NUMBER DESCRIPTION QTY
A M3 0.8 - 0.9 7-8 - - - -
B M4 1.8 - 2.0 16 - 18 - - - -
C 8-32 2.0 - 2.2 18 - 20 A 21 110-M3F-05 SCREW,M3 X 5,PFH,SS 12
58 9370071-02R BRACKET,RACK MTG,GREY 2
59 MH-8125-BA HANDLE,RND,1.25",AL,BLK,ANODZ 2
C 60 110EG20-08 SCREW,8-32 X .500,PFH,100D,SS 4
B 61 060-3029 SCREW,M4X6,FLAT,PHIL,SS,DIN965 4
73 9370427-02R PLATE,RK MNT CONN,GREY 1
- - - -
75 109-704-25 FOAM,1 INCH,SQ,ADH,2-SIDE,WHT 2
ASSEMBLY STEPS:
1. INSTALL THE CONNECTOR PLATE, ITEM 73, TO THE UNDERSIDE OF
BOTH CHASSIS USING (12X) M3 SCREWS, ITEM 21.
UNITS 2. INSTALL THE HANDLES, ITEM 59, TO THE RACK BRACKETS, ITEM 58,
USING (4X) 8-32 FLAT HEAD SCREWS, ITEM 60.
2X .125 3. INSTALL THE RACK BRACKETS USING (4X) M4 FLAT HEAD SCREWS, ITEM 61.
3.0
75 2X NOTE UNLESS OTHERWISE SPECIFIED:
1. USE RECOMMENDED TORQUE FOR ALL FASTENERS.
3.0
73
60 4X
61 4X
12X 21 2X 59 58 2X
ASSEMBLY INSTRUCTION, RACK MOUNT,DUAL, PAGE 2 OF 2 October 06, 2014 Document No. 071338600 Rev A