Wavetek_3510_Signal_Generator_Service_Manual_(partial).pdf part of Wavetek Wavetek 3510 Signal Generator Service Manual (partial) Wavetek_3510_Signal_Generator_Service_Manual_(partial).pdf, Wavetek Wavetek_3510_Signal_Generator_Service_Manual

Text preview for : Wavetek_3510_Signal_Generator_Service_Manual_(partial).pdf part of Wavetek Wavetek 3510 Signal Generator Service Manual (partial) Wavetek Wavetek_3510_Signal_Generator_Service_Manual_(partial).pdf

Back to : Wavetek_3510_Signal_Gener | Home

Wavetek 3510 Service Manual

1.1 CALIBRATION PROCEDURE

Remove the instrument top and bottom cover and the card cage cover. Allow a
two-hour warm-up period before calibration. In general, calibration should be
performed in the sequence given.

1.1.1 Power Supply

DPS14 ADJUSTMENT

Note: All measurements are made with reference to chassis ground.

+18V VOLT ADJUSTMENT