Text preview for : 42v5_training_125.pdf part of LG 42v5 training 125 LG Plasma 42V5 training 42v5_training_125.pdf



Back to : 42v5_training_125.pdf | Home

PDP Instruction Manual for customers



Model 42V5




ver 1.01
CONTENTS



INTRODUCTION

PRECAUTIONS

BASIC

TROUBLE SHOOTING




This manual is for the 42" V5 model.
Basic rules are same with 42" V5 for other models.
1. Introduction
1.1PDP module
PDP module is composed with PANEL part and DRIVE part. Panel is consist of electrode, phosphor, dielectric, gas.
And drive part is made up of electronic circuit (X , Y-sus, Z sus, Y drv,PSU,CTRL B/D) and PCB.




3
1. Introduction
1.2 About 42V5 model




X means XGA resolution (1024 768) .
using dual scan method
V5 shows 1000:1 contrast ratio and 1000cd.
So V5 called as KK model.




1.3 The purpose of this manual
1. We want to communicate harmoniously by educating a defect phenomenons and terms
to send LG Electronics a message that includes a detail articles of defect panel.
2. Let customers can distinguish module defect(LG Electronics defect) and a defect from their work by
educating an early analysis for SET maker .So customers can decide easily whether it is LG defect or customer's.
3. Prevent defects which is made during set assembly process previously by educating
Work precautions and conditions.
Since mixed terms may cause confusion. Please use the formal terms which in this manual.




4
1. Introduction

42 inch V5 MODEL.


Y DRV TOP Z-SUS B/D




Y-SUS B/D




IPM

Y-DRV BTM




CONTROL B/D + X-LEFT B/D X-RIGHT B/D



5
1. Introduction
1.4 Definitions
Definition of MODULE position
* Back side of module long 1

E/X Tube

Exhaust
hole short 2
Y-SUS
Z - SUS
short 1
long 2
CONTROLLER
Signal Input
(R,G,B,H/Vsync.) X right



COF long2-1