Text preview for : Operation Instruction & Installation.pdf part of



| Home

10 Operating Installations and Installation



10 Operating Installations and Installation
10-1 Product Features
10-1-1 Front




1. SOURCE 6. POWER INDICATOR
Displays a menu of all of the available input Blinks and turns off when the power is on and
sources ( TV, Ext. 1, Ext. 2, AV, S-Video, lights up in stand-by mode.
Component, PC, HDMI).
Also used to confirm your choice on the 7. REMOTE CONTROL SENSOR
on-screen menu. Aim the remote control towards this spot on the
TV.
2. MENU
Press to see an on-screen menu of your TV's 8. LIGHT DETECTING SENSOR
features. Adjusts the brightness of the screen automati
cally by detecting brightness of the surrounding
3. - VOL + environment. This sensor works when the
Press to decrease or increase the volume. Brightness Sensor is on.
Also used to select items on the on-screen
menu. 9. SPEAKERS

4. CH
Press to change channels.
Also press to highlight various items
on the on-screen menu.

5. POWER
Press to turn the TV on and off.



10-1
10 Operating Installations and Installation

10-1-2 Back(LE26M51B)




10-2
10 Operating Installations and Installation

10-1-3 Back(LE32M51B / LE32M61B / LE40M51B / LE40M61B/ LE46M51B)




10-3
10 Operating Installations and Installation

1. Connecting an Aerial or Cable Television Network
To view television channels correctly, a signal must be received by the set from one of the following
sources:
- An outdoor aerial
- A cable television network
- A satellite network

2. Connecting Component Devices (DTV/DVD)
- Connect component video cables to component connector ("PR", "PB", "Y") on the rear of your set
and the other ends to corresponding component video out connectors on the DTV or DVD.
- If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top
Box to the DTV (or DVD) and connect the DTV (or DVD) to component connector ("PR", "PB", "Y")
on your set.
- The Y, Pb and Pr connectors on your component devices (DTV or DVD) are sometimes labeled Y,
B-Y and R-Y or Y, Cb and Cr.
- Connect RCA audio cables to