Text preview for : H20-0140-1_1130_Numerical_Surface_Techniques_and_Contour_Map_Plotting_Application.pdf part of



| Home

-- ===:. =. -
- -==
- --
--
-
- ---
---
- -
===:;:" = ~ = Application Program




1130 Numerical Surface Techniques
and Contour Map Plotting
Application Description


This manual contains a general description of a set of
programs adaptable to application areas that require the
quantitative description of surfaces. These programs make
numerical or analytical approximations to a set of coordinate
values which define a surface, and prepare a display of the
geometry of the surface in the form of a plotter contour map.
CONTENTS
Introduction. . . . . 1

Surface Determination 1

Surface Representation by a Square Grid 2

Surface Fitting with an Analytic Function 2

Operations on and between Surfaces '. . . . . . . 2

Graphic Display 2

Utility Routines 5

General System Flow 5

Source Language . . . 6

Minimum Configuration 6

Reference 6




This is a minor revision of, and does not obsolete, H20-0140-0.
Changes do not affect the content of the manual.

Copies of this and other IBM publications can be obtained through IBM branch
offices. Address comments concerning the contents of this publication to
IBM, Technical Publications Department, 112 East Post Road, White Plains, N. Y. 10601
INTRODUCTION
In practically all of the sciences and fields of engineering there is the
need to express a surface of interest analytically by an equation or
numerically by a system of data points. In many of these disciplines
there is the further need to express the configuration of a surface
graphically in the form of contour lines on a map or chart. In order
to describe the various types of data on this map or chart, it is desirable
to plot symbols, to letter alphabetic data, to post numeric values, to
provide headings, and to draw various types of boundary lines.

This set of programs provides these functions in such a way that they may
be carried out singly or in various combinations, with no necessity for
intermediate card output. The programs included in the set perform
functions in the areas of:

1. Surface Determination