Text preview for : 05_Operation Instruction & Installation.pdf part of Samsung 05 Operation Instruction & Installation Samsung DVD DVD-P355 dvd-p355 05_Operation Instruction & Installation.pdf
Back to : 05_Operation Instruction | Home
12. Operating Instructions
SETUP
Description
Front Panel Controls
1 2 3 4 5 6
STANDBY/ON VOLUME EZ VIEW
MIC
MIN MAX
7 8 9 10 11
1. STANDBY/ON ( ) 7. MIC
When STANDBY/ON is pressed on, the indicator goes Connect Microphone for karaoke functions.
out and the player is turned on. 8. MICROPHONE VOLUME
2. STANDBY indicator Use to adjust microphone volume level. Use the button by
When the unit is first plugged in, this indicator lights. pressing it. Turn it to the left or right to control the volume.
3. STOP ( ) 9. SKIP ( / ) SEARCH
Stops disc play. Allow you to search forward/backward through
a disc. Use to skip the title, chapter or track.
4. PLAY/PAUSE ( )
Begin or pause disc play. 10. DISPLAY
Operation indicators are displayed here.
5. EZ VIEW
The aspect ratio of a picture can easily be adjusted to 11. DISC TRAY
your TV's screen size (16:9 or 4:3). Place the disc here.
6. OPEN/CLOSE ( )
Press to open and close the disc tray.
Front Panel Display
1 2
1. Chapter/Track number indicator
2. Total playing time/Displays various
messages concerning operations
such as PLAY, STOP, LOAD ...
no DISC: No disc loaded.
OPEN: The disc tray is open.
LOAD: Player is loading disc information.
ENG-8
Samsung Electronics 12-1
Operating Instructions
SETUP
Setup
Rear Panel
1 2
1 3 4 5
1. DIGITAL AUDIO OUT JACKS 4. VIDEO OUT JACK
- Use either an optical or coaxial digital cable to connect - Use a video cable to connect to the Video input jack on
to a compatible Dolby Digital receiver. your television.
- Use either an optical or coaxial digital cable to connect - The Video Output in Setup Menu must be set to
to an A/V Amplifier that contains a Dolby Digital, COMPOSITE/S-VIDEO.
MPEG2 or DTS decoder. 5. S-VIDEO OUT JACK
2. COMPONENT VIDEO OUT JACKS - Use the S-Video cable to connect this jack to the
- Use these jacks if you have a TV with Component S-Video jack on your television for higher picture
Video in jacks. These jacks provide PR, PB and Y video. quality.
- If Component(P-SCAN) Video Output is selected in - The Video Output in Setup Menu must be set to
Setup Menu, progressive scan mode will work. COMPOSITE/S-VIDEO.
- If Component(I-SCAN) Video Output is selected in
Setup Menu, interlaced scan mode will work.
3. AUDIO OUT JACKS
Connect to the Audio input jacks of your television or
audio/video receiver.
Note
- Consult your TV User's Manual to find out if your TV supports Progressive Scan (P-SCAN).
If Progressive Scan is supported, follow the TV User's Manual regarding Progressive Scan settings in the
TV's menu system.
- If Component (P-SCAN) Video Output is selected in Setup Menu, Video and S-Video Outputs do not work.
- See pages 52 ~ 53 to get more information on how to use the setup menu.
ENG-9
12-2 Samsung Electronics
Operating Instructions
SETUP
Tour of the Remote Control
1. DVD POWER Button
Turns the power on or off.
2. NUMBER Buttons
1 11
3. PROG Button
Allows you to program a specific order.
4. STEP Button
2 Advances play one frame at a time.
5. SEARCH/SKIP Buttons ( / , / )
Allow you to search forward/backward through a disc.
12 Use to skip the title, chapter or track.
3
13 6. STOP Button ( )
4 14 7. MENU Button
Brings up the DVD player's menu.
5
8. RETURN Button
6 15 Returns to a previous menu.
7 16 9. KARAOKE Button
Use to begin Karaoke functions.
8 17
10. SUBTITLE Button
11. OPEN/CLOSE ( ) Button
18 To open and close the disc tray.
12. CLEAR Button
Use to remove menus or status displays from the screen.
9 19 13. INSTANT REPLAY Button
This function is used to replay the previous 10 seconds of a
10 20 movie from the current position.
21 14. INSTANT SKIP Button
22 This function skips playback ahead 10 seconds.
15. PLAY/PAUSE Button ( )
Begin/Pause disc play.
16. INFO Button
Displays the current disc mode.
17. DISC MENU Button
Brings up the Disc menu.
18. ENTER/...oe Buttons
...
This button functions as a toggle switch.
19. EZ VIEW Button
The aspect ratio of a picture can easily be adjusted according
to the screen size of your TV (16:9 or 4:3).
20. REPEAT Button
Allows you to repeat play a title, chapter, track, or disc.
21. ANGLE Button
Use to access various camera angles on a DVD.
22. AUDIO Button
Use this button to access various audio functions on a disc.
ENG-10
Samsung Electronics 12-3
Operating Instructions
Chapter 2
CONNECTIONS
Choosing a Connection
Connections
The following shows examples of connections commonly used to connect the DVD player with a TV
and other components.
Before Connecting the DVD Player
- Always turn off the DVD player, TV, and other components before you connect or disconnect any
cables.
- Refer to the user's manual of the additional components (such as a TV) you are connecting for
more information on those particular components.
Connection to a TV (Video)
1
Using video/audio cables, connect the VIDEO (yellow)/AUDIO
(red and white) OUT terminals on the rear of the DVD player to
the VIDEO (yellow)/AUDIO (red and white) IN terminals of your
TV.
2
Turn on the DVD player and TV.
RED WHITE YELLOW
Audio Cable Video Cable
RED WHITE YELLOW
3
Press the input selector on your TV remote control until the
Video signal from the DVD player appears on the TV screen.
Note
- Noise may be generated if the audio cable placed too close to the power cable.
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 15 to 16)
- The number and position of terminals may vary depending on your TV set.
Please refer to the user's manual of your TV.
- If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) terminal of the DVD
player.
ENG-11
12-4 Samsung Electronics
Operating Instructions
CONNECTIONS
Connection to a TV (S-Video)
- Connecting to your TV using an S-Video cable.
- You will enjoy high quality images. S-Video separates the picture element into black and white(Y)
and color(C) signals to present clearer images than regular video input mode. (Audio signals are
delivered through the audio output.)
1
Using an S-Video cable (not included), connect the S-VIDEO
OUT terminal on the rear of the DVD player to the
S-VIDEO IN terminal of your TV.
2
Using the audio cables, connect the AUDIO (red and white)
OUT terminals on the rear of the DVD player to the AUDIO (red
and white) IN terminals of your TV.
Turn on the DVD player and TV.
RED WHITE
3
Press the input selector on your TV remote control until the Audio Cable S-Video Cable
(not included)
S-Video signal from the DVD player appears on your TV
screen. RED WHITE
4
Set the Video Output to COMPOSITE/S-VIDEO in the Display
Setup menu. (See pages 52 to 53)
Note
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 15 to 16)
- The number and position of terminals may vary depending on the TV set.
Please refer to the user's manual of your TV.
ENG-12
Samsung Electronics 12-5
Operating Instructions
CONNECTIONS
Connection to a TV (Interlace)
- Connecting to your TV using Component video cables.
Connections
- You will enjoy high quality and accurate color reproduction images. Component video separates
the picture element into black and white(Y), blue(PB), red(PR) signals to present clear and clean
images. (Audio signals are delivered through the audio output.)
1
Using component video cables (not included), connect the
COMPONENT VIDEO OUT terminals on the rear of the DVD
player to the COMPONENT IN terminals of your TV.
2
Using the audio cables, connect the AUDIO (red and white) RED BLUE GREEN
OUT terminals on the rear of the DVD player to the AUDIO (red
and white) IN terminals of your TV.
Turn on the DVD player and TV.
3 RED WHITE
Press the input selector on your TV remote control until the
Component signal from the DVD player appears on the TV Audio Cable
screen. Component cable
(not included)
RED WHITE RED BLUE GREEN
4
Set the Video Output to Component (I-SCAN) in the Display
Setup menu. (See pages 52 to 53)
Note
- If Video output is incorrectly set to COMPOSITE/S-VIDEO with the Component cables connected, the
screen will turn red.
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 15 to 16)
- The component terminal of your TV may be marked "R-Y, B-Y, Y" or "Cr, Cb, Y" instead of "PR, PB, Y"
depending on the manufacturer. The number and position of terminals may vary depending on the TV set.
Please refer to the user's manual of your TV.
ENG-13
12-6 Samsung Electronics
Operating Instructions
CONNECTIONS
Connection to a TV (Progressive)
1
Using component video cables (not included), connect the
COMPONENT VIDEO OUT terminals on the rear of the DVD
player to the COMPONENT IN terminals of your TV.
2 RED BLUE GREEN
Using the audio cables, connect the AUDIO (red and white)
OUT terminals on the rear of the DVD player to the AUDIO (red
and white) IN terminals of your TV.
Turn on the DVD player and TV.
3 RED WHITE
Press the input selector on your TV remote control until the
Component signal from the DVD player appears on the TV Audio Cable
screen. Component cable
(not included)
RED WHITE RED BLUE GREEN
4
Set the Video Output to Component (P-SCAN) in the Display
Setup menu. (See pages 52 to 53)
To see the progressive video output,
- Consult TV set TV User's Manual to find out if your TV supports Progressive Scan.
You need a your supporting the progressive scan input
function. And you have to set up the TV menu to the the TV User's Manual regarding Progressive Scan settings
If Progressive Scan is supported, follow
progressive scan input. system.
in the TV's menu
- Depending on your TV, the connection method may differ from the illustration above.
Note
- What is "Progressive Scan"?
Progressive scan has twice as many scanning lines as the interlace output method.
Progressive scanning method provides better and clearer picture quality.
ENG-14
Samsung Electronics 12-7
Operating Instructions
CONNECTIONS
Connection to an Audio System (2 Channel Amplifier)
1
Connections
Using the audio cables, connect the AUDIO (red and white)
OUT terminals on the rear of the DVD player to the AUDIO (red
and white) IN terminals of the Amplifier.
2
Using the video signal cable(s), connect the VIDEO, S-VIDEO or
COMPONENT OUT terminals on the rear of the DVD player to
the VIDEO, S-VIDEO or COMPONENT IN terminal of your TV
as described on pages 11 to 14.
3 RED WHITE
Turn on the DVD player, TV, and Amplifier. Audio Cable
RED WHITE
2-Channel stereo amp
4
Press the input select button of the Amplifier to select external
input in order to hear sound from the DVD player.
Refer to your Amplifier's user manual to set the Amplifier's
audio input.
Note
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause
damage to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier. (See pages 50 to 51)
- The position of terminals may vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
ENG-15
12-8 Samsung Electronics
Operating Instructions
CONNECTIONS
Connection to an Audio System (Dolby digital, MPEG2 or DTS Amplifier)
1
If using an optical cable (not included), connect the DIGITAL
AUDIO OUT (OPTICAL) terminal on the rear of the DVD player
to the DIGITAL AUDIO IN (OPTICAL) terminal of the Amplifier.
If using a coaxial cable (not included), connect the DIGITAL
AUDIO OUT (COAXIAL) terminal on the rear of the DVD player
to the DIGITAL AUDIO IN (COAXIAL) terminal of the Amplifier.
2
Using the video signal cable(s), connect the VIDEO, S-VIDEO
or COMPONENT OUT terminals on the rear of the DVD player
to the VIDEO, S-VIDEO or COMPONENT IN terminal of your
TV as described on pages 11 to 14.
Coaxial Cable
3
or
(not included)
Optical Cable
(not included)
Turn on the DVD player, TV, and Amplifier.
Dolby digital or
DTS amp
4
Press the input select button of the Amplifier to select external
input in order to hear sound from the DVD player.
Refer to your Amplifier's user manual to set the Amplifier's
audio input.
Note
- When you connect the DVD player to DTS Amplifier and play a DTS disc, set the DTS to On in Audio
Setup menu. If it is set to Off, sound will not be heard, or there will be a loud sound.
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause
damage to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier. (See pages 50 to 51)
- The position of terminals may vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
ENG-16
Samsung Electronics 12-9
Operating Instructions
Chapter 3
BASIC FUNCTIONS
Playing a Disc
Before Play
- Turn on your TV and set it to the correct Video Input on the TV's remote control.
- If you connected an external Audio System, turn on your Audio System and set it to the correct
Audio Input.
After plugging in the player, the first time you press the DVD POWER button, this screen
Functions
comes up: If you want to select a language, press a NUMBER button. (This screen will
Basic
only appear when you plug in the player for the first time.)
If the language for the startup screen is not set, the settings may change whenever you
turn the power on or off. Therefore, make sure that you select the language you want to
use.
Once you select a menu language, you can change it by pressing the button on the
front panel of the unit for more than 5 seconds with no disc in the unit. Then the SELECT
MENU LANGUAGE window appears again where you can reset your preferred language.
Playback
1
Press the OPEN/CLOSE
( ) button.
The STANDBY indicator
light goes out and the tray
opens.
2
Place a disc gently into the
tray with the disc's label
facing up.
RESUME function
3 When you stop disc play, the player remembers
Press the PLAY/PAUSE ( ) where you stopped, so when you press
button or OPEN/CLOSE ( ) PLAY/PAUSE ( ) button again, it will pick up
button to close the disc tray. where you left off. (unless the disc is removed
or the player is unplugged, or if you press the
STOP ( ) button twice.)
ENG-17
12-10 Samsung Electronics
Operating Instructions
BASIC FUNCTIONS
Note
4 - If the player is left in the stop mode for more than
Stopping Play one minute without any user interaction, a screen
Press the STOP ( ) button saver will be activated. Press the PLAY/PAUSE
during play. ( ) button to resume normal play.
- If the player is left in the stop mode for more than
30 minutes, the power will automatically turn off
except when the MIC is connected. (Automatic
Power-Off Function)
5
Removing Disc
Press the OPEN/CLOSE
( ) button.
Screen stops, no sound.
6 To resume, press the PLAY/PAUSE ( ) button
Pausing Play once again.
Press the PLAY/PAUSE
( ) or STEP button on the
remote control during play.
Note
If the player is left for about 5 minutes in pause
mode, it will stop.
Each time the button is pressed, a new frame
7 will appear.
Step Motion Play (Except No sound is heard during STEP mode.
CD) Press the PLAY/PAUSE ( ) button to resume
Press the STEP button on normal play.
the remote control during You can only perform step motion play in the
play. forward direction.
No sound is heard during slow mode.
8 Press the PLAY/PAUSE ( ) button to resume
Slow Motion Play (Except normal play.
CD) Reverse slow motion play will not work.
Press and hold the
SEARCH ( ) button to
choose the play speed
between 1/8, 1/4 and 1/2 of
normal during PAUSE or Note
STEP mode.
This ( ) icon indicates an invalid button press.
ENG-18
Samsung Electronics 12-11
Operating Instructions
BASIC FUNCTIONS
Using the Search and Skip Functions
During play, you can search quickly through a chapter or track, and use the skip function to jump to
the next selection.
Searching through a Chapter or Track
If you want to search at a faster speed on the
During play, press the DVD, VCD or CD, press and hold the button.
SEARCH ( or ) button
DVD 2X, 8X, 32X, 128X
on the remote control for
more than 1 second. VCD 4X, 8X
CD 2X, 4X, 8X
Functions
Note
Basic
- The speed marked in this function may be
different from the actual playback speed.
- No sound is hearing during search mode
(Except CD).
Skipping Tracks
During play, press the SKIP
( or ) button.
- When playing a DVD, if you press the SKIP ( )
button, it moves to the next chapter. If you press
the SKIP ( ) button, it moves to the beginning
of the chapter. One more press makes it move to
the beginning of the previous chapter.
- When playing a VCD 2.0 in Menu Off mode, or a
VCD 1.1 or a CD, if you press the SKIP ( )
button, it moves to the next track. If you press
the SKIP ( ) button, it moves to the beginning
of the track. One more press makes it move to
the beginning of the previous track.
Note
- If a track exceeds 15 minutes when playing a When playing VCD 2.0, this function works only
VCD and you press the button, it moves when the menu is off.
forward 5 minutes. If you press the button,
it moves backward 5 minutes.
ENG-19
12-12 Samsung Electronics
Operating Instructions
BASIC FUNCTIONS
Using the Display Function
When Playing a DVD/VCD/CD/MPEG4
You can select Info in the function menu by
1 pressing the MENU button.
During play, press the INFO
button on the remote
control.
2 DVD
Press the .../ buttons to
select the desired item. 01
02
0:00:13
ENG 5.1CH
Off
VCD
When playing VCD 2.0, this function works only
01
when the menu is off.
0:00:43
CD
01
0:00:48
MPEG4
01
0:00:13
MP3 1/8
None
640x272
ENG-20
Samsung Electronics 12-13
Operating Instructions
BASIC FUNCTIONS
You may use the number buttons of the remote
3 control to directly access a title, chapter or to
Press the oe/ buttons to start the playback from a desired time.
make the desired setup,
then press the ENTER
button.
4
To make the screen
Functions
disappear, press the INFO
Basic
button again.
Note
To access the desired title when there is more than one in the disc.
For example, if there is more than one movie on a DVD, each movie will be identified.
Most DVD discs are recorded in chapters so that you can quickly find a specific passage (similar to
tracks on an audio CD).
Allows playback of the film from a desired time. You must enter the starting time as a reference.
The time search function does not operate on some discs.
Refers to the film's soundtrack language.
In the example, the soundtrack is played in English 5.1CH.
A DVD disc can have up to eight different soundtracks.
The MP3, AC3 and WMA are supported.(DivX)
Refers to the subtitle languages available in the disc.
You will be able to choose the subtitle languages or, if you prefer, turn them off from the screen.
A DVD disc can have up to 32 different subtitles.
(DivX)
File Size has a relationship with resolution of a title.
The larger file size is, the higher resolution is displayed.
If the file resolution is small, it scales up automatically. So you can see the larger screen.
ENG-21
12-14 Samsung Electronics
Operating Instructions
BASIC FUNCTIONS
Using the Disc and Title Menu
Using the Disc Menu (DVD)
1
During the playback of a
DVD disc, press the MENU
button on the remote
control.
Note
- Depending on a disc, the Disc Menu may not
2 work.
Press the .../ buttons to Press ENTER key - You can also use the Disc Menu, using the DISC
for Disc Menu
select Disc Menu, then MENU button on the remote control.
press the or ENTER - In VCD 2.0 the DISC MENU button is used to
button. select Menu On or Menu Off mode.
Using the Title Menu (DVD)
1
During the playback of a
DVD disc, press the MENU
button on the remote
control.
2
Press the .../ buttons to Press ENTER key
select Title Menu, then for Title Menu
press the or ENTER Note
button. - Depending on a disc, the Title Menu may not
work.
- Title Menu will only be displayed if there are at
least two titles in the disc.
ENG-22
Samsung Electronics 12-15
Operating Instructions
BASIC FUNCTIONS
Using the Function Menu
Using the Function Menu (DVD/VCD)
1
Press the MENU button
during playback.
Functions
2
Basic
Press the .../ buttons to Info
select Function, then press Zoom
the or ENTER button. Bookmark
Repeat
- Info (See pages 20 to 21) EZ View
- Zoom (See page 34)
- Bookmark
(See pages 32 to 33)
- Repeat (See pages 24 to 25)
- EZ View
(See pages 27 to 28)
You can also directly select these functions
3 using their respective buttons on the remote
Press the .../ buttons control.
to select one of the five - INFO
functions. Then press - EZ VIEW
the or ENTER button - REPEAT
to access the function.
ENG-23
12-16 Samsung Electronics
Operating Instructions
BASIC FUNCTIONS
Repeat Play
Repeat the current track, chapter, title, a chosen section (A-B), or all of the disc.
When playing a DVD/VCD/CD
1
Press the REPEAT button
on the remote control.
Repeat screen appears.
DVD repeats play by chapter or title, CD and
2 DVD VCD repeat play by disc or track.
Press the oe/ buttons to Chapter ( ): repeats the chapter that is
Off 01 01 A-B REPEAT ENTER
select Chapter, Title or A-B, T
playing.
then press the ENTER Title ( ): repeats the title that is playing.
button. Disc ( ): repeats the disc that is playing.
VCD/CD Track ( ): repeats the track that is playing.
A-B: repeats a segment of the disc that you
Off T 01 D 01 A-B REPEAT ENTER select.
Using the A-B Repeat function
1. Press the REPEAT button on the remote control.
2. Press the oe/ buttons to Select A-B.
3. Press the ENTER button at the point where you want repeat play to start (A).
B is automatically highlighted.
4. Press the ENTER button at the point where you want the repeat play to stop (B).
- To return to normal play, press the CLEAR button.
Note
A-B REPEAT does not allow you to set point (B) until at least 5 seconds of playback time has
elapsed after point (A) has been set.
3 DVD
To return to normal play,
Off 01 T 01 A-B REPEAT ENTER
press REPEAT button
again, then press the oe/
buttons to select Off and
press ENTER button.
VCD/CD Note
Off T 01 D 01 A-B REPEAT ENTER
- Depending on a disc, the Repeat function may
not work.
- When playing VCD 2.0, this function works only
when the menu is off.
ENG-24
Samsung Electronics 12-17
Operating Instructions
BASIC FUNCTIONS
Slow Repeat Play
This feature allows you slowly to repeat scenes containing sports, dancing, musical instruments
being played etc., so you can study them more closely.
When playing a DVD/VCD
1
During play, press the
PLAY/PAUSE ( ) button.
Functions
Basic
2
Press and hold the
SEARCH ( ) button to
choose the play speed
between 1/8, 1/4 and 1/2 of
normal during PAUSE or
STEP mode.
The disc will play from A to B repeatedly at the
3 speed you chose.
Press the REPEAT button
on the remote control.
Press the oe/ buttons to
select A-B.
To set A-B REPEAT, set (A) first, then set (B)
4 after the following slow play time has elapsed:
Press the ENTER button at 1/8x: wait 40 seconds, then press B
the point where you want 1/4x: wait 20 seconds, then press B
repeat play to start (A).
B is automatically 1/2x: wait 10 seconds, then press B
highlighted. Press the
ENTER button at the point
where you want the repeat
play to stop (B).
5
To return to normal play,
press the CLEAR button Note
and then press the When playing VCD 2.0, this function works only
PLAY/PAUSE ( ) button. when the menu is off.
ENG-25
12-18 Samsung Electronics
Operating Instructions
BASIC FUNCTIONS
Program Play & Random Play
Program Play (CD)
Program Play allows you to select the order in which you want tracks to play.
1
During play, press the
PROG button.
2
oe
Press the oe/ buttons to PROGRAM RANDOM
select PROGRAM.
Press the ENTER button.
- To return to the previous menu screen, press
3 PROGRAM 01 the RETURN button.
Press the ...//oe/ buttons Track Program Order - To cancel the selected program order, press
to select the first track to 01 02 03 04 - - - - - - - - the CLEAR button.
05 06 07 08 - - - - - - - -
add to the program. 09 10 11 12 - - - - - - - - - This unit can support a maximum of 20
Press the ENTER button.
13 14 15 16 -
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
programmed tracks.
The selection numbers
appear in the Program
Order box.
4
Press the PLAY/PAUSE
( ) button.
The disc will be played in
programmed order.
Random Play (CD)
Random Play plays a disc's tracks in random order.
1 PROGRAM oe RANDOM
Press the PROG button.
Note
2 - Depending on a disc, the Program and Random
Press the oe/ buttons to Play functions may not work.
select RANDOM. - While in playback mode, press the CLEAR button
Press the ENTER button. on the remote control to cancel Program Play or
Random Play.
ENG-26
Samsung Electronics 12-19
Operating Instructions
Chapter 4
A D VA N C E D F U N C T I O N S
Adjusting the Aspect Ratio (EZ View)
To play back using aspect ratio (DVD)
Press the EZ VIEW
button.
- The screen size
changes when the
button is pressed
repeatedly.
- The screen zoom mode
operates differently
depending on the screen
To make the aspect ratio bar disappear,
setting in the Display
Setup menu. WIDE SCREEN EZ VIEW
press the CLEAR button.
- To ensure correct
operation of the EZ
VIEW button, you should
set the correct aspect
ratio in the Display
Functions
Advanced
Setup menu.
(See pages 52 to 53).
If you are using a 16:9 TV
For 16:9 aspect ratio discs For 4:3 aspect ratio discs
- WIDE SCREEN - Normal Wide
Displays the content of the DVD title in 16:9 aspect ratio. Displays the content of the DVD title in 16:9 aspect ratio.
The picture will look horizontally stretched.
- SCREEN FIT
The top and bottom portions of the screen are cut off. When - SCREEN FIT
playing a 2.35:1 aspect ratio disc, the black bars at the top The top and bottom portions of the screen are cut off and
and bottom of the screen will disappear. The picture will the full screen appears.
look vertically stretched. (Depending on a type of disc, the The picture will look vertically stretched.
black bars may not disappear completely.)
- ZOOM FIT
- ZOOM FIT The top, bottom, left and right portions of the screen are cut
The top, bottom, left and right of the screen are cut off and off and the central portion of the screen is enlarged.
the central portion of the screen is enlarged.
- Vertical Fit
When a 4:3 DVD is viewed on a 16:9 TV, black bars will
appear at the left and right of the screen in order to prevent
the picture from looking horizontally stretched.
ENG-27
12-20 Samsung Electronics
Operating Instructions
A D VA N C E D F U N C T I O N S
If you are using a 4:3 TV
For 16:9 aspect ratio discs For 4:3 aspect ratio discs
- 4:3 Letter Box - Normal Screen
Displays the content of the DVD title in 16:9 aspect ratio. Displays the content of the DVD title in 4:3 aspect ratio.
The black bars will appear at the top and bottom of the
screen. - SCREEN FIT
The top and bottom portions of the screen are cut off and
- 4:3 Pan Scan the full screen appears.
The left and right portions of the screen are cut off and the The picture will look vertically stretched.
central portion of the 16:9 screen is displayed.
- ZOOM FIT
- SCREEN FIT The top, bottom, left and right portions of the screen are cut
The top and bottom portions of the screen are cut off and a off and the central portion of the screen is enlarged.
full screen appears.
The picture will look vertically stretched.
- ZOOM FIT
The top, bottom, left and right of the screen are cut off and
the central portion of the screen is enlarged.
Note
This function may behave differently depending on the type of disc.
ENG-28
Samsung Electronics 12-21
Operating Instructions
A D VA N C E D F U N C T I O N S
Selecting the Audio Language
You can select a desired audio language quickly and easily with the AUDIO button.
Using the AUDIO button (DVD/VCD/CD/MPEG4)
1
Press the AUDIO button.
The Audio changes when
the button is pressed
repeatedly.
- The audio languages
are represented by
abbreviations.
DVD
ENG DOLBY DIGITAL 5.1CH AUDIO
VCD/CD
Functions
Advanced
When playing a VCD or CD,
you can select among Stereo AUDIO
Stereo, Right or Left.
MPEG4
Press the oe/ buttons to
PCM 1/2
select the desired Audio on
a MPEG4 then press the
ENTER .
2 Note
To remove the AUDIO - This function depends on audio languages are
icon, press the CLEAR or encoded on the disc and may not work.
RETURN button.
- A DVD disc can contain up to 8 audio languages.
- To have the same audio language come up
whenever you play a DVD;
Refer to "Using the Audio Language" on page 48.
ENG-29
12-22 Samsung Electronics
Operating Instructions
A D VA N C E D F U N C T I O N S
Selecting the Subtitle Language
You can select a desired subtitle quickly and easily with the SUBTITLE button.
Using the SUBTITLE button (DVD/MPEG4)
1
Press the SUBTITLE
button.
The subtitle changes when
the button is pressed
repeatedly.
The subtitle languages are
represented by
abbreviations. DVD
Off SUBTITLE
MPEG4
Press the oe/ buttons to
1/8
select the desired subtitle
language on a MPEG4 then
press the ENTER . Note
- Depending on DVDs, you have to change the