Text preview for : EN-Magnifica-ESAM03110S-im.pdf part of DE`LONGHI EN-Magnifica-ESAM03110S-im DE`LONGHI Esam 03.110.S.EX1 EN-Magnifica-ESAM03110S-im.pdf
Back to : EN-Magnifica-ESAM03110S-i | Home
5713213461/08.09
BEAN TO CUP ESPRESSO DE
AND CAPPUCCINO MACHINE
GB
ESAM 03.110
ElECTRICAl REqUIREMENTS
Before using this appliance ensure that the voltage indicated on the product corresponds with the
main voltage in your home, if you are in any doubt about your supply contact your local electricity
company.
The flexible mains lead is supplied connected to a B.S. 1363 fused plug having a fuse of 13 amp
capacity.
Should this plug not fit the socket outlets in your home, it should be cut off and replaced with a suitable
plug, following the procedure outlined below.
Note: Such a plug cannot be used for any other appliance and should therefore be properly disposed of
and not left where children might find it and plug it into a supply socket - with the obvious consequent
danger.
N.B. We recommend the use of good quality plugs and wall sockets that can be switched off when the
machine is not in use.
IMPORTANT: the wires in the mains lead fitted to this appliance are coloured in accordance with the
following code:
Green and Yellow to Earth
13 amp
Fuse
green and yelloW earTh
Brown to
Blue neuTral live
Blue to
BroWn live neutral Cord Clamp
as the colours of the wires in the mains lead of this appliance may not correspond with the coloured
markings identifying the terminals in your plug, proceed as follows:
- The wire which is coloured green and yellow must be connected to the terminal in the plug which
is marked with the letter e or by the earth symbol or coloured green or green and yellow.
- The wire which is coloured blue must be connected to the terminal which is marked with the letter
n or coloured black.
- The wire which is coloured brown must be connected to the terminal which is marked with the letter
l or coloured red.
When wiring the plug, ensure that all strands of wire are securely retained in each terminal. do not
forget to tighten the mains lead clamp on the plug. if your electricity supply point has only two pin
socket outlets, or if you are in doubt, consult a qualified electrician.
Should the mains lead ever require replacement, it is essential that this operation be carried out by a
qualified electrician and should only be replaced with a flexible cord of the same size.
after replacement of a fuse in the plug, the fuse cover must be refitted. if the fuse cover is lost, the plug
must not be used until a replacement cover is obtained. The colour of the correct replacement fuse
cover is that of the coloured insert in the base of the fuse recess or elsewhere on the plug. always state
this colour when ordering a replacement fuse cover.
only 13amp replacement fuses which are asta approved to B.S. 1362 should be fitted.
This appliance conforms to the norms en 55014 regarding the suppression of radio interference.
Warning - this appliance must be earthed
2
A3 A4 A5 A6 A7 IT
A2
A1
A8
A21
A20
A9
A19
A10 A11
A18
A12
A17 A13
A14
A16
A23 A15
B3 B5
B1 B7
B2 B4 B6
B8 B9
B15 B16
B11
B10
B12 B13 B14 B17
3
1 2 3
4 5 6 7
8 9 10 11
12 13 14 15
4
IT
16 17 18 19
20 21 22 23
5
Contents settInG WAteR HARDness ................. 16
Measuring water hardness .............................. 16
IntRoDUCtIon ..................................7 Set water hardness ......................................... 16
Symbols used in these instructions ................. 7
Letters in brackets ............................................ 7 teCHnICAL sPeCIFICAtIon .................. 16
Troubleshooting and repairs ............................. 7
DIsPosAL ....................................... 16
sAFetY ............................................7
Fundamental safety warnings ........................... 7
MeAnInG oF LIGHts DURInG noRMAL
oPeRAtIon .................................... 17
DesIGnAteD Use ................................8
MeAnInG oF tHe ALARM LIGHts .......... 18
InstRUCtIons ...................................8
tRoUBLesHootInG ........................... 19
DesCRIPtIon.....................................8
Description of the appliance.............................. 8
Description of control panel .............................. 8
PReLIMInARY CHeCKs .........................9
Checking the appliance ..................................... 9
Installing the appliance ..................................... 9
Connecting the appliance .................................. 9
Using the appliance for the first time ................ 9
tURnInG tHe APPLIAnCe on .................9
tURnInG tHe APPLIAnCe oFF .............. 10
settInG AUto-oFF (stAnD-BY) ............ 10
eneRGY sAVInG ............................... 10
MAKInG CoFFee ............................... 10
Selecting the coffee taste ................................ 10
Selecting the quantity of coffee in the cup ...... 11
Adjusting the coffee mill ................................. 11
Tips for a hotter coffee: ................................... 11
Making coffee using coffee beans ................... 11
Making coffee using pre-ground coffee .......... 12
MAKInG CAPPUCCIno ........................ 12
Cleaning the cappuccino maker after use........ 13
HeAtInG WAteR ............................... 13
CLeAnInG ....................................... 13
Cleaning the coffee maker ............................... 13
Cleaning the coffee grounds container ............ 13
Cleaning the drip tray ...................................... 14
Cleaning the inside of the machine ................. 14
Cleaning the water tank ................................... 14
Cleaning the coffee spouts .............................. 14
Cleaning the pre-ground coffee funnel ............ 14
Cleaning the infuser ........................................ 14
DesCALInG ..................................... 15
6
IntRoDUCtIon sAFetY
Thank you for choosing the ESAM03.110 auto-
matic coffee and cappuccino maker. Fundamental safety warnings
We hope you enjoy using your new appliance.
Danger!!
Take a few minutes to read these instructions.
This is an electrical appliance and may therefore
This will avoid all risks and damage to the ma-
cause electric shock.
chine.
symbols used in these instructions You should therefore respect the following safety
Important warnings are identified by these warnings:
symbols.