Text preview for : philips_tpf13a_la_chassis_isp_instruction_176.pdf part of Philips philips tpf13a la chassis isp instruction 176 Philips LCD TV (and TPV schematics) TPF1.3A la philips_tpf13a_la_chassis_isp_instruction_176.pdf
Back to : philips_tpf13a_la_chassis | Home
50 TPF1.3A LA 8. Alignments
8.4 ISP Instructions
Configuration and procedure
"Easywriter " The software is provided by Novatek to upgrade the
firmware of CPU.
It is a windows-based program, which cannot be run in MS-DOS.
DDC2BI_ISP TOOL (3138 149 53161) is for the interface between
"Parallel Port of PC" and "15 pin-D-SUB connector of Monitor".
System and equipment requirements Fig. 4
1. An i486 (or above) personal computer or compatible.
2. Microsoft operation system Windows 95/98/2000/XP.
3. ISP Software " Easywrite " Step 5 :Copy the hex code to C:\Ta1000 as shown in Fig. 5 .
4. DDC2BI_ISP TOOL (3138 106 10396) as shown in Fig. 1
2oTA1000
D-SUB to monitor
Parallel Port to Print Port in PC
Fig. 5
Fig. 1
Update the firmware
1. Double click the Easywriter.exe icon in desktop then appears
5. Connect DDC2BI_ISP TOOL and Mains cord to Monitor as shown
window as shown in Fig.7 .
in Fig. 2.
PC
Ta1000 -Monitor (B)
Monitor (A) D-Sub
- - - - - - - - - - - - - - - ->
To video card
To printer port (LTP1)
Connect to Mains
Connect to cord at this moment.
Mains cord
ISP box
Video cable
Fig.2
6. Install and setup the Easywriter program Fig. 6
Step 1 : Make a folder in your PC as shown in Fig. 3.
For example : C:\Ta1000
Step 2 : Copy ISP Software Easywriter.zip into your folder
as shown in Fig.3.
Step 3 : Unzip Easywriter.zip into your folder as shown in Fig. 3.
Step 4 : Double click the EasywriterV2.09a_user.exe icon to install the
Application as Fig. 4.
Fig. 7
Fig. 3
2. Press the Load hex then select the hex as shown in Fig. 8.
8. Alignments TPF1.3A LA 51
If there is a warring message coming as shown in Fig 12. , you
have to check the AC power, Video cable, or Novatek MCU.
Fig. 8
3 Press the AUTO to running program , the firmware be updated
as shown in Fig. 9~10.
Fig. 12
5 Check the firmware version
1). Turn off monitor.
2). Press power " " button.Then quickly push " + " and " - "of
Fig. 9
Volume ,and hold this two buttons , then the screen comes out
"Waiting For Automatic Adjustment ",then the screen will be black
for one second untill comes out "Windows screen"] => then
release this two buttons.
3). Press "MENU" button, wait until the OSD menu come on the
Screen of the monitor,You will find, after upgrade, the version
have already been changed as shown in
Fig. 13 and Fig. 14.
Fig. 10
4 Press the file --> exit to end program , as shown in Fig. 11. Fig. 13
Factory Mode indicator
Fig. 14
Fig. 11
Factory Mode indicator
4) Turn off the monitor, exit the factory mode.