Make | Model | Problem | Solution | Date |
| | | |
Found: 26
|
Samsung | CI3373 SCT13B | Dead - LED flashes every 2 secs | Dry joint coll LOPTr - not obvious to see | 14-09-04 |
Samsung | CI3373Z SCT11B/D | Service mode access | Stby/P.STD/HELP/SLEEP/POWER ON. Controls VOL +/- CHANNEL +/- EXIT with Status,{all on r/c} | 14-09-04 |
|
Samsung | CI5079T SCT11D | Blue screen with no sound - menus partly off top of screen | Eeprom settings lost - with SAA5290ZP-026 set option byte to 5D, with-042 suffix Eeprom set option byte to CA; still no signals present - pin 1 of micro s/c to chassis - new micro reqd | 14-09-04 |
Samsung | CI5373 SCT11B | Tripping | LOPTx arcing - when replaced field coll; HIC301 VPG101 hybrid chip | 14-09-04 |
Samsung | CI5373 SCT11D | Apparent blank raster | FOPT chip was faulty | 14-09-04 |
Samsung | CI5373 SCT11D | Service mode access | Press St/by, Std Pic button, Help, Sleep, Power On. Parameters selected with Ch+/Ch- & changed using Vol+/-; SBT = 44, SCT = 32, RC = 0, GC = 0, BC = 0, RG = 32, BG = 32. Press 'Status' to store & exit | 14-09-04 |
Samsung | CI593CN SCT12B | No pic - sound ok | Replace IC201 TDA8375/N3 | 14-09-04 |
Samsung | CI593CN SCT12B | Stuck in standby, 5V supply to Micro IC901 pin 34 is low | Replace Micro Z8933212PSC-R3593 , part number AA13-30018K ( 30UKP+VAT ) | 14-09-04 |
Samsung | CI5944 SCT12B | Field & E/W problems | IC301 fails - SEME supply kit RK12 | 14-09-04 |
Samsung | CI6844N SCT12B | Service adjust proc | 1. Press standby, display, menu, mute, standby, OR Press standby, picture standard, help, sleep, standby OR Press standby>display>menu>mute>power on
option bytes
:
: 1 zoom mode: wide/normal/zoom: 2 audio mode: nicam stereo: 3 one chip: TDA8844
: 4 led option: normal: 5 language: west eng/ger/dut/spa/ita/swe: 6 system: CI
: 7 ats option: on: 8 field pol: field pos
:: having set the option bytes , press menu key and reset message should appear on the screen.
: [the zoom, one chip and field pol bytes are set according to the size and type of crt]. | 14-09-04 |
Samsung | SCT11B | dead, fuse blown | replace C803 2n2 800V (2303-000163 or A1102-0331), DZ801 R2KN (0403-000691), IC801 (AA13-20004P), HC801 (AA13-20004M). Note: HC801 and IC801 must be "C" version! | 14-09-04 |
Samsung | SCT11B CI5079T | frame collapse | IC201 MS2309BSP faulty, no drive from pin 18 (1204000431) | 14-09-04 |
Samsung | SCT11B CI5079T | frame collapse | R410 o/c | 14-09-04 |
Samsung | SCT11B CI5079T | frame jitter | replace HC301 (AA13-20002W) | 14-09-04 |
Samsung | SCT11B CI5373T | dark pic at switch on, Ok after 10 min | LOPTx (AA26-30001Y) | 14-09-04 |
Samsung | SCT11B CI5373T | reduced frame and no video/sound | replace EEPROM IC902 (B4000-0135) | 14-09-04 |
Samsung | SCT11B/D CI3373 CI5079 | Dead with DZ801 or IC801 s/c | If signs of overheating round faulty components - psu produces excess HT in st/by; In st/by 125v HT should rise to 140v but does rise to 180v in some sets. Replace DZ801 with pt no 0403-000691; IC801 replace with AA13-20004P; HC801 replace with AA13-20004M & if still excessive Ht change C852 for 2301-000111 | 14-09-04 |
Samsung | SCT11D | Field collapse | R410 1R feeding D403 o/c | 14-09-04 |
Samsung | SCT12B | dead | IC801 (STRS6709) & Q805 TIP102 | 14-09-04 |
Samsung | SCT12B | E/W fault - TDA8350 chip fails | Mod available | 14-09-04 |
Samsung | SCT12B | Failure of TDA8350 fop chip | Add additional components TV FFinding Feb 2000 gives details | 14-09-04 |
Samsung | SCT12B | Flyback line at top of screen | R307 10R | 14-09-04 |
|
Samsung | SCT12B | no power up LED flashes yellow | check IC901 has 5v supply, osc at pin 31,32 - if no osc sus xtal X901 | 14-09-04 |
Samsung | SCT12B CI5944N | frame foldover at the top | R307 10R 0.5W o/c | 14-09-04 |
Samsung | WI28W6VD SCT53A | Reverts to st/by with strange noise from psu aft few mins | DZ808 7v5 zener pt no 0403-000562 | 14-09-04 |
Sunkyong | SCT1045R | TV sect dead - radio sect OK | TV sw faulty - was able to swap TV sw with radio switch & still have them both working correct functs | 14-09-04 |