hp 1200 free download

File name hp1200 cartrage.pdf

HP1200/1300TECH Technical Instructions CORPORATE LOS ANGELES, USA US 1 800 394.9900 Int'l +1 818 837.8100 FAX 1 800 394.9910 Int'l +1 818 838.7047 Supplies Soft Lint Free Cloth Swabs Toner Wiper Blade Tools Drill; 7/64 and 9/32-drill bits Phillips Screwdriver Small Flat Blade Screwdriver Diagonal Cutters Bend Extraction Tool 1 Anhydrous Isopropyl Alcohol Padding Powder Doctor Blade Drum ATLANTA, USA US 1 877 676.4223 Int'l +1 770 516.9488 FAX 1 877 337.7976 Int'l +1 770 516.7794 Photo 1 Step 1 Place the cartridge on the workbench so the cartridge is right side up and the arrow on the waste hopper is pointing towards you. (See Photo 1) DALLAS, USA US 1 877 499.4989 Int'l +1 972 840.4989 FAX 1 877 774.1750 Int'l +1 972 840.1750 MIAMI, USA US 1 800 595.429 Int'l +1 305 594.3396 FAX 1 800 522.8640 Int'l +1 305 594.3309 NEW YORK, USA US 1 800 431.7884 Int'l +1 631 345.0121 FAX 1 800 431.8812 Int'l +1 631345.0690 Photo 2 Step 2 Holding the drum shutter open with your left hand, lift the top right side of the shutter up with your right hand. This will dislodge the shutter post from its cradle. (See Photo 2) SANFORD,USA US 1 800 786.9049 Int'l +1 919 775.4584 FAX 1 800 786.9049 Int'l +1 919 775.4584 TORONTO, CAN CAN 1 877 848.0818 Int'l +1 905 712.9501 FAX 1 877 772.6773 Int'l +1 905 712.9502 Photo 3 Step 3 Slide the drum shutter right to remove the shutter post from the cradle on the left side. (See Photo 3) BUENOS AIRES, ARG ARG 0810 444.2656 Int'l +011 4583.5900 FAX +011 4584.3100 MELBOURNE, AUS AUS 1 800 003. 100 Int'l +62 03 9561.8102 FAX 1 800 004.302 Int'l +62 03 9561-7751 SYDNEY, AUS AUS 1 800 003.100 Int'l +62 02 9648.2630 FAX 1800 004.302 Int'l +62 02 9548.2635 Photo 4 NOTE: Do not lose the drum shutter tension spring that sits on the left shutter post. (See Photo 4) MONTEVIDEO,URY URY 02 902.7206 Int'l +5982 900.8358 FAX +5982 908.3816 JOHANNESBURG, S.A. S.A. +27 11 974.6155 FAX +27 11 974.3593 E-mail: [email protected] Website: www.futuregraphicsllc.com 2 HP 1200/1300 Technical Instructions Step 4 Photo 5 Photo 6 Using a drill with a 7/64 bit, drill a hole into the raised plastic that covers the cartridge pin on the back right side of the waste hopper. (See Photo 5) NOTE: Drill in just far enough to expose the cartridge pin enabling the pin to be pushed through the cartridge with a bent extraction tool. (See Photo 6) Photo 7 Photo 8 Step 5 Change the bit on the drill to a 9/32 bit. The next hole needs to be drill on the left side of the waste hopper where the drum shutter arm bends down toward the drum. Photo 7 and Photo 8 show before and after the hole is drilled Photo 9 Photo 10 Step 6 With a bent extraction tool push the cartridge pin out. (See Photos 9) Step 7 Remove the screw holding the bearing hub on the gear end of the drum (See Photo 10). Remove the hub. Photo 11 Step 8 Grab the drum by the gear. Lift and rotate the drum counter clockwise while pulling the drum out away from the drum