| Make | Model | Problem | Solution | Date |
| | | |
| Found: 438 |
| Samsung | CI5330AN | Dead C412 burnt | Replaced C412 1000pf 2kv & LOPTr | 14-09-2004 |
| Samsung | CI5332T | Sound at full blast even when turned down | R625 10k oc | 14-09-2004 |
| Samsung | CI5332T | Sound at max & can't be turned down - OSD OK | R625 10k in vol DC network o/c | 14-09-2004 |
| Samsung | CI5337 | No sound aft warm up with slight darker pic | IC802 12v reg I/p & o/p low - D802 1N4003 feeding it was leaky | 14-09-2004 |
| Samsung | CI5337AN | Partial field collapse & dark pic aft 2 mins | IC802 12v reg I/p only 9v instead of 15v - D801 1N4003 leaky | 14-09-2004 |
| Samsung | CI5337AN US60A | Dead - no line drive | IC101 TDA4504B 12v supply low at 8v. D801 1N4007 in 12v feed leaky | 14-09-2004 |
| Samsung | CI533CN S51A | No sigs - ok thro' SCART | Adj in Factory setting menu - need service manual for info | 14-09-2004 |
| Samsung | CI5344 | Poor/no col, no or noisy sound or no sync Setting Option | Wrong Options set - to reset to UK standard - sw on at mains sw, use R/C to go to st/by, key in "display", "menu", "mute", & "standby" in quick succession to enter option set up. Set option for "CI", go to reset, Press "Vol Up" (the display will show "Wait for 5 secs"). Finally go to st/by | 14-09-2004 |
| Samsung | CI5344N | No control of col, contr, brill - dark pic | First switch on TV on BBC1. Press this in order STANDBY, DISPLAY, MENU,MUTE, AND STANDBY The tv will switch on with no sound.You must check these values
SCT = 16 SBT = 7 SCR = 5 Once these values have been entered select RESET mode. The TV will reset and then switch on. | 14-09-2004 |
| Samsung | CI5344N | No sound at sw on | Check values SCT=16, SBT=17 and SCR=5 in serv mode. Once entered select reset, TV resets
and switches on. | 14-09-2004 |
| Samsung | CI5344N | Service mode access | Switch to bbc1,press standby, display, menu, mute and standby. | 14-09-2004 |
| Samsung | CI537 P55 | Int dead with relay chattering | replace relay & check PH01 D/J | 14-09-2004 |
| Samsung | CI537/41Z | FLASHING ONE COLOUR THEN NO PIC | R407 330k 1/2w , FIT 140K AND 190K 1/2w IN SERIES IN PLACE OF LINK J52 AND FIT WIRE LINK IN PLACE OF R407 | 14-09-2004 |
| Samsung | CI5373 | FRAME COLLAPSE | CHECK R410 FOR O/C | 14-09-2004 |
| Samsung | CI5373 | Loss of tuning, contrast, green, brill aft power surge | Set up proc reqd - see printed sheet | 14-09-2004 |
| Samsung | CI5373 SCT11B | Tripping | LOPTx arcing - when replaced field coll; HIC301 VPG101 hybrid chip | 14-09-2004 |
| Samsung | CI5373 SCT11D | Apparent blank raster | FOPT chip was faulty | 14-09-2004 |
| Samsung | CI5373 SCT11D | Service mode access | Press St/by, Std Pic button, Help, Sleep, Power On. Parameters selected with Ch+/Ch- & changed using Vol+/-; SBT = 44, SCT = 32, RC = 0, GC = 0, BC = 0, RG = 32, BG = 32. Press 'Status' to store & exit | 14-09-2004 |
| Samsung | CI5373T | Blank raster & lack of height | Replaced eeprom & set up | 14-09-2004 |
| Samsung | CI5373T | DARK PICTURE, GRADUALLY INCREASES | LOPTX FAULTY | 14-09-2004 |