Pioneer pioneer avh-x7500bt avh-x7550bt crt5331 free download

File name pioneer_avh-x7500bt_avh-x7550bt_crt5331.pdf

ORDER NO. CRT5331 AVH-X7500BT/XNUC DVD RDS AV RECEIVER AVH-X7500BT /XNUC AVH-X7500BT /XNEW5 AVH-X7500BT /XNUW5 AVH-X7550BT /XNRC AVH-X7550BT /XNRD AVH-X7550BT /XNRI This service manual should be used together with the following manual(s): Model No. Order No. Mech.Module Remarks CX-3268 CRT4534 MS7 DVD Mech. Module : Circuit Descriptions, Mech. Descriptions, Disassembly www.electronicsrepair.net K-ZZZ MAR. 2013 Printed in Japan 1 2 3 4 SAFETY INFORMATION CAUTION A This service manual is intended for qualified service technicians; it is not meant for the casual do-it-yourselfer. Qualified technicians have the necessary test equipment and tools, and have been trained to properly and safely repair complex products such as those covered by this manual. Improperly performed repairs can adversely affect the safety and reliability of the product and may void the warranty. If you are not qualified to perform the repair of this product properly and safely, you should not risk trying to do so and refer the repair to a qualified service technician. WARNING This product may contain a chemical known to the State of California to cause cancer, or birth defects or other reproductive B harm. Health & Safety Code Section 25249.6 - Proposition 65 Where in a manufacturer's service documentation, for example in circuit diagrams or lists of components, a symbol is used to indicate that a specific component shall be replaced only by the component specified in that documentation for safety reasons, the following symbol shall be used: - Safety Precautions for those who Service this Unit. When checking or adjusting the emitting power of the laser diode exercise caution in order to get safe, reliable results. C Caution: 1. During repair or tests, minimum distance of 13 cm from the focus lens must be kept. 2. During repair or tests, do not view laser beam for 10 seconds or longer. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY