Now downloading free:Philips 3a repair tips
Download Philips 3a repair tips docs - TV - Conventional CRT, LCD Projectors, TFT, Plasma, Big Screen, HDTV, Home theater - Service manuals, repair tips
Information about the files in archive: |
Decompress result: | OK |
Extracted files: | 1 |
File name | | Text |
3a_repair_tips.pdf | | Funkcijske
No function, after being switched onFault 1: The last position has been stored after switch off. Faults that can
occur: The appliance has been switched off with the remote control and afterwards the mains plug has been
pulled out of the socket. Now the TV can only be switched on with the remote control (or it goes to standby).
the appliance goes to stand-by.
No function, the power supply gurgles and whistles.
Fault 1 The audio module has a short, therefore the power supply is intermittent.
No function.
Fault 1: Capacitor 2609 (8200pF/1500V) is defective.
Fault 2: Power supply goes to protection mode. Check if power supply or loading is defective. Replace
loading with a 220V (100W) lamp. If power supply ok then change C2609.
Fault 3: Check if service no. starts with AG01. Appliance is set to protective mode. Check fuse T1638.
Fault 4: Check if 300V present. If no 140V then check R3681 (6K8).
Fault 5: + 140V is not present. Replace TS7687 (BUT12A; 4822 130 43919).
Also repla |
>> View document online <<
>> Download document <<
Average rating for this file: 0.00 ( from 0 votes)
Similar Service Manuals : - - - - - - -