panasonic c9smtm1 free download

File name c9smtm1.pdf

Item Key Operation FL Display Mode Name Description Front Key Error code Error code check In STOP (no disc) mode, check The latest error code stored in the press [STOP] button on the EEPROM IC is displayed. main unit, and [0] button on the remote control unit. *With pointing of cursor up and F/H/U down on display. Error code (play_err) is expressed in the Cancelled automatically following convention. 5 seconds later. Note: Refer to "Section 8.3 DVD Self Error code = 0 x DAXX is expressed: DVDnn U12 To exit, press [POWER] Diagnostic Function-Error Code" for Error code = 0 x DBXX is expressed: DVDnn H12 button on main unit or more detailed information on the error Error code = 0 x DXXX is expressed: DVDnn F123 remote control. codes. Error code = 0 x 0000 is expressed: DVDnn F--- * "xx" denotes the error code Jitter check Jitter check. (Display 1) In STOP mode, press Jitter rate is measured and displayed. [STOP] button on the main Measurement is repeatedly done in unit, and [5] button on the cycle of one second. Read error the remote control unit. counter starts from zero upon mode setting. Press [POWER] or [STOP] When target block data failed to be Jitter check Jitter rate button to exit. read out, the counter advances by one mode