SC-HTB770Software update procedure(Ver.98)
Check software version before update
1 Plug in AC Cord.
2 Power on the main unit.
3 While pressing the [VOL-]button at main unit front side,
and perform the following operation same time.
1) Press remote control [VOL -]
2) Press remote control [VOL +]
4 After all LED blink 3 times, stop pressing [VOL -] button at main unit.
5 When "TV" LED blinks, press remote control [VOL+].
Notice before version up
After pressing the remote control [VOL+] above,
some LED light like as follows drawing.
"STANDARD", "STADIUM","MUSIC","CINEMA","NEWS" and "STEREO".
These 6 LEDs below stand for binary code.
means LED is lighting.|