. Various 2200 Manual Section 2 free download

File name 2200 Manual Section 2.pdf

OPTIMOD-FM 2200 INSTALLATION 2-1 Section 2 Installation page contents 2-2 Installation of 2200 2-7 Figure 2-1: AC Line Cord Wire Standard 2-9 Figure 2-2: Wiring the 25-pin Remote Control Connector 2-17 Basic System Setup 2-27 System Setup Controls 2-27 I/O CALIB (I/O Calibration) 2-32 Stereo Encoder (and processing Pre-Emphasis) 2-34 Remote Interface 2-35 TEST Mode CAUTION pagecontents The installation and servicing instructions in this manual are for use by qualified personnel only. To avoid electric shock, do not perform any servicing other than that contained in the Operating Instructions unless you are qualified to do so. Refer all servicing to qualified service personnel. 2-2 INSTALLATION OPTIMOD-FM 2200 Installation of 2200 Allow about 2 hours for installation. Installation consists of: (1) unpacking and inspecting the 2200, (2) optional resetting of jumpers for 2200 options (composite output impedance, input termination, input sensitiv- ity), (3) checking the line voltage setting, fuses and power cord, (4) mounting the 2200 in a rack, (5) connecting inputs, outputs and power, (6) setting the GROUND LIFT switch, (7) and optional connecting of remote control leads. When you have finished installing the 2200, proceed to "System Setup," on page 2-16. 1. Unpack and inspect. A If you note obvious physical damage, contact the carrier immediately to make a damage claim. Packed with the 2200 are: 1 Operating Manual 1 Quick Setup Guide 1 Line Cord 2 1/ A Replacement Fuses for "U" and "J" Versions 2 2 250mA Replacement Fuses for "E" Version 1 Orban green screwdriver (Xcelite R3323) 1 Booklet: Audio Quality in the FM Plant B Save all packing materials! If you should ever have to ship the 2200 (e.g., for servicing), it is best to ship it in the original carton with its packing materials because both the carton and packing ma