. Various Panel SHARP LQ0DZA1003 0 [DS] free download

File name Panel_SHARP_LQ0DZA1003_0_[DS].pdf

SPEC No. DATE REVISED SUMMARY NOTE No. PAGE LD-15919 Sep.26 2003 - - - 1st Issue LD-15919-1 1. Application This specification applies to the color 18.1 SXGA TFT-LCD module LQ0DZA1003. The device listed in these specification sheets was designed and manufactured for use in OA equipment. In case of using the device for applications such as control and safety equipment for transportation(aircraft, trains, automobiles, etc. ), rescue and security equipment and various safety related equipment which require higher reliability and safety, take into consideration that appropriate measures such as fail-safe functions and redundant system design should be taken. Do not use the device for equipment that requires an extreme level of reliability, such as aerospace applications, telecommunication equipment(trunk lines), nuclear power control equipment and medical or other equipment for life support. 2. Overview This module is a color active matrix LCD module incorporating amorphous silicon TFT (Thin Film Transistor). It is composed of a color TFT-LCD panel, driver ICs, control circuit, power supply circuit and a back light unit. Graphics and texts can be displayed on a 1280 3 1024 dots panel with about 16 million colors (8 bit) by supplying 48 bit data signals(8bit 2pixel RGB) or 96 bit data signals(8bit 4pixel RGB), two display enable signals, two dot clock signals, +5V DC and +15V DC supply voltages for TFT-LCD panel driving and supply voltage for back light. LD-15919-2 3. Mechanical Specifications Parameter Specifications Unit Display size 46 (Diagonal) cm 18.1 (Diagonal) Inch Active area 359.0 (H) 287.2 (V) Mm Pixel format 1280 (H) 1024 (V) Pixel (1 pixel R G B dots) Pixel pitch 0.2805 (H) 0.2805 (V) Mm Pixel configuration R,G,B vertical stripe Display mode Normally Black Unit outline dimensions *1 414 (W) 335 (H) 24 (D) Mm Mass 3280 80 g Surface treatment Anti-glare and hard-coating 2H *1.Note: excluding back light cables. The thickness of module (D) doesn't contain the projection. Outline dimensions are shown in Fig.1. LD-15919-3 4. Input Terminals 4-1. TFT-LCD panel driving CN1 (Interface signals and +5V