. Various Panel SHARP LK460D3LA9S 0 [DS] free download

File name Panel_SHARP_LK460D3LA9S_0_[DS].pdf

RECORDS OF REVISION MODEL No. : LK460D3LA9S SPEC No. : LD-K21Y18 REVISED SPEC No. DATE PAGE SUMMARY NOTE No. LD-K21Y18 2010.2.15 - - - 1st ISSUE LD- K21Y18-1 1. Application This specification applies to the color 46.0" TFT-LCD module LK460D3LA9S * This specification is proprietary product of SHARP CORPORATION ("SHARP") and includes materials protected under copyright of SHARP. Do not reproduce or cause any third party to reproduce them in any form or by any means, electronic or mechanical, for any purpose, in whole or in part, without the express written permission of SHARP. * In case of using the device for applications such as control and safety equipment for transportation (aircraft, trains, automobiles, etc.), rescue and security equipment and various safety related equipment which require higher reliability and safety, take into consideration that appropriate measures such as fail-safe functions and redundant system design should be taken. * Do not use the device for equipment that requires an extreme level of reliability, such as aerospace applications, telecommunication equipment (trunk lines), nuclear power control equipment and medical or other equipment for life support. * SHARP assumes no responsibility for any damage resulting from the use of the device that does not comply with the instructions and the precautions specified in these specification. * Contact and consult with a SHARP sales representative for any questions about this device. 2. Overview This module is a color active matrix LCD module incorporating amorphous silicon TFT (Thin Film Transistor). It is composed of a color TFT-LCD panel, driver ICs, control circuit, power supply circuit, LED drive circuit and back light system etc. Graphics and texts can be displayed on a 1920 RGB 1080 dots panel with one billion colors by using 10bit (8bit + 2FRC) LVDS (Low Voltage Differential Signaling) to interface, +12V of DC supply voltages. This module also includes the LED-PWB module to drive the LED. ( 120mA of DC supply current) And in order to improve the response time of LCD, this module applies the Over Shoot driving (O/S driving) technology for the control circuit .In the O/S driving technology, signals are being applied to the Liquid Crystal according to a pre-fixed process as an image signal of the present frame when a difference is found between image signal of the previous frame and that of the current frame after comparing them. With this technology, image signals can be set so that liquid crystal response completes within one frame. As a result, motion blur reduces and clearer display performance can be realized. This LCD module also adopts Quadruple-Frame Rate driving method including FRC (Frame Rate Control) function on the co