Agilent HP 87130A Operation and Service Manual free download

File name HP 87130A Operation and Service Manual.pdf

87130A Attenuator/Switch Driver Operating and Service Guide Manual part number: 87130-90007 Printed in USA August 2001 Supersedes: May 2000 Notice The information contained in this document is subject to change without notice. Agilent Technologies makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Agilent Technologies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. Agilent Technologies assumes no responsibility for the use or reliability of its software on equipment that is not furnished by Agilent Technologies. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, published electronically, or translated to another language without prior written consent of Agilent Technologies. RESTRICTED RIGHTS LEGEND Use, duplication, or disclosure by the U.S. Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227-7013 for DOD agencies, and subparagraphs (c)(1) and (c)(2) of the Commercial Computer Software Restricted Rights clause at FAR 52.227-19 for other agencies. Agilent Technologies, Inc. 1400 Fountaingrove Parkway Santa Rosa, CA 95403-1799, U.S.A. NOTE A serial number label is attached to the rear panel of each instrument. The first six entries are the same for all identical modules; they only change when a change in the electrical or physical functionality is made. The remaining digits are assigned sequentially and are different for each instrument. This manual applies directly to instruments with the following prefix and above: US4018