Agilent M9393 SoftwareReleaseNotes M9393A Software Release Notes c20141025 [2] free download

File name M9393_SoftwareReleaseNotes M9393A Software Release Notes c20141025 [2].pdf

Software Release Notes Keysight M9393A PXIe Vector Signal Analyzer Notice: This document contains references to Agilent. Please note that Agilent's Test and Measurement business has become Keysight Technologies. For more information, go to www.keysight.com. Keysight M9393A Version 1.0.80.1, August 2014 Documentation Defects Fixed Defect Description 320892 RF Attenuation Change is not proportional to Mixer Level Offset change 338088 Document how to do calibration with 89600 and M9393 hardware 338101 Alert user that no signal should be present on the M9393A during calibration Software Defects fixed Defect Description 335782 Alignments fail if conversion mode is not set to Auto 337060 Alignments fail if multiple instances of M9393 in the same process 338698 Corrected trigger qualification of wideband burst trigger for IVI and 89600 332857 89600: Reconnecting to M9393 from 89600 fails in certain sequences 335725 89600: Large span to RBW ratios may generate errors 331064 89600: Certain triggered measurements stall if trigger not received in 1 sec 332469 89600: Incorrect power reading at certain settings when using average detector 336180 89600: Corrected handling of trigger delay limits 339074 89600: Minimum span can be less than 800 Hz 337258 89600: Overlap Percentage error with Gate Trigger and Power Spectrum 339305 Trigger Delay and Holdoff is incorrect or causes errors when used with 89600 Software Release Notes (part number: M9393-90008), page 2 of 2